This adds a new deviceinfo parameter, 'boot_part_start' which accepts an
int and indicates the number of sectors from the start of the drive to
place the boot partition.
The librem5 devkit (and actual phone) u-boot has grown beyond the 2048
sector space previously before the boot partition, so this is necessary in
order to boot pmos on this device.
With the nokia N900 the user can choose between different keyboard
layouts and during the install the setup-keymap installs the choosen
layout.
This only changes the keyboard layout of the console, while installing
a UI using xorg, the layout was hardcoded to "us".
With a simple check for the existence of an xorg config containing
XkbLayout, this will run sed to replace the default with the layout
chosen by the user.
Tested with a clean install of the nokia N900 with the xfce4 UI.
The sparse image tools (simg2img, img2simg, append2simg) are now
part of Alpine's android-tools where they are continously updated.
(See https://github.com/nmeum/android-tools/pull/8)
Therefore, "libsparse" now conflicts with "android-tools", which
causes the fastboot flasher to fail if "libsparse" is already
installed.
Install "android-tools" instead of "libsparse" before generating
a sparse image to avoid this problem.
At the moment, attempting to install to SD card when
flash_sparse is set to "true" will always fail because
/home/pmos/rootfs does not exist in that case.
Sparse images are only useful to speed up Fastboot flashing.
Nothing will be able to read it from the SD card.
The problem can therefore be avoided by simply skipping the
generation of the sparse image when SD card installation is used.
From https://docs.python.org/3/library/re.html
"Backslashes are not handled in any special way
in a string literal prefixed with 'r'."
Signed-off-by: Steffen Pankratz <kratz00@gmx.de>
This allows embedding multiple firmware binaries into SD images.
Firmware images for most devices that require this functionality consist
mainly of u-boot, but some devices (e.g. librem5) have multiple firmware
images that need to be embedded in the SD image created by pmbootstrap.
This functionality uses two new deviceinfo parameters:
- deviceinfo_sd_embed_firmware: a comma-separated list of
binary:offset (where binary is under /usr/share/firmware)
- deviceinfo_sd_embed_firmware_step_size: The number of bytes for
each increment of the offset specified in the
deviceinfo_sd_embed_firmware (typically 1024 or 2048)
deviceinfo_write_uboot_spl has been obsoleted by these new parameters.
Follow-up to !1373, where `pmbootstrap flasher flash_system` was
replaced with `pmbootstrap flasher flash_rootfs`. We still had used
terms like "system partition" in a lot of places.
This commit replaces it everywhere, so it's clear that we're talking
about the pmOS rootfs (which may or may not be installed to Android's
system partition).
* Travis and Coveralls badges
* aports: instead of <https://github.com/postmarketOS>, use
<https://postmarketos.org>
* References to full URLs to issues and pull requests replaced with
a hash and the number
* grsec check: simplify error message, remove link to github issue
(nobody is using that anymore anyway)
This allows the user to talk to networkmanager to manage the system
connections. As it is mentioned in networkmanager pre-install.
```
Executing networkmanager-1.10.6-r0.pre-install
*
* To setup system connections, regular users must be member of 'plugdev' group.
```
The plugdev group gets created in the post-install hook of
networkmanager. Not all UIs depend on networkmanager, which means that
the group may not exist at installation time when we try to add the
user to the group in the python code. Therefore we create the group
first.
* change "pmbootstrap kconfig_check" to "pmbootstrap kconfig check"
* change "pmbootstrap menuconfig" to "pmbootstrap kconfig edit [-x|-g]"
(with legacy alias, because the first syntax was referenced to a lot)
* enable X11 interfaces: -x: xconfig, -g: gconfig
* new function to copy the xauthority file:
pmb.chroot.other.copy_xauthority()
* remove menufconfig() function from the kernel template and all kernel
aports ([skip ci] because it would rebuild all kernels and run out of
time). Alpine has dropped this as well, and it wouldn't work with the
new code anyway.
* Usage: pmbootstrap install --split
* Make obvious that export is the next step when split images are created
* Fix note for missing rootfs image on export
* Change wording from "system image" to "rootfs image"
* The idea was to show the note only when the rootfs image was not
generated yet. But this was broken, because the path we checked for
was missing the chroot path prefix (which is added now).
* Also don't display the message, when the split image files exist
The postmarketos-base package used to make the user part of the "video"
and "audio" groups. However, this did not work reliably, and we were
adding the "wheel" group in "pmbootstrap install" anyway.
Now all groups get added in "pmbootstrap install", and the names of the
groups have been moved to `pmb.config.install_user_groups`.
* As discussed in IRC/matrix, we're removing `linux-postmarketos-lts`
for now. The kernel isn't used right now, and we save lots of
maintenance effort with not updating it every week or so.
* new config option `"kernel"` with possible values:
`"downstream", "mainline", "stable"` (downstream is always
`linux-$devicename`)
* ask for the kernel during `pmbootstrap init` if the device package
has kernel subpackages and install it in `_install.py`
* postmarketos-mkinitfs: display note instead of exit with error when
the `deviceinfo_dtb` file is missing (because we expect it to be
missing for downstream kernels)
* device-sony-amami:
* add kernel subpackages for downstream, mainline
* set `deviceinfo_dtb`
* device-qemu-amd64: add kernel subpackages for stable, lts, mainline
* test cases and test data for new functions
* test case that checks all aports for right usage of the feature:
* don't mix specifying kernels in depends *and* subpackages
* 1 kernel in depends is maximum
* kernel subpackages must have a valid name
* Test if devices packages reference at least one kernel
* Remove `_build_device_depends_note()` which informs the user that
`--ignore-depends` can be used with device packages to avoid building
the kernel. The idea was to make the transition easier after a change
we did months ago, and now the kernel doesn't always get built before
building the device package so it's not relevant anymore.
* pmb/chroot/other.py:
* Add autoinstall=True to kernel_flavors_installed(). When the flag
is set, the function makes sure that at least one kernel for the
device is installed.
* Remove kernel_flavor_autodetect() function, wherever it was used,
it has been replaced with kernel_flavors_installed()[0].
* pmb.helpers.frontend.py: remove code to install at least one kernel,
kernel_flavors_installed() takes care of that now.
* Change `pmbootstrap flasher flash_system` command to
`pmbootstrap flasher flash_rootfs`
* The old command still works, but all references have been changed to
the new command
* Remove obsolete `pmbootstrap flasher export` (that was changed to
`pmbootstrap export` a few months ago)
* Update `README.md` and ZSH auto completion
* Change the description of the generated rootfs image (not talking
about a system image anymore, mention that it has subpartitions)
* Better description of `pmbootstrap flasher flash_rootfs --partition`
* Save "" (empty string) in the user's config as hostname if the user
let it default to the name of the device. That way, when the device
gets changed, the user won't get the old device's name as hostname
by accident.
* Add a test case
Here are the changes necessary in pmbootstrap to make proprietary
software installed onto the device (firmware and userspace drivers)
optional (#756). To full close the issue, we need to apply this concept
to all device packages we already have in a follow-up PR.
Changes:
* New config file options nonfree_firmware and nonfree_userland, which
we ask for during "pmbootstrap init" if there are non-free components
for the selected device.
* We find that out by checking the APKBUILD's subpakages: The non-free
packages are called $pkgname-nonfree-firmware and
$pkgname-nonfree-userland.
* During "pmbootstrap init" we also show the pkgdesc of these
subpackages. Parsing that is implemented in
pmb.parse._apkbuild.subpkgdesc(). It was not implemented as part of
the regular APKBUILD parsing, as this would need a change in the
output format, and it is a lot *less* code if done like in this
commit.
* pmb/parse/apkbuild.py was renamed to _apkbuild.py, and
pmb/install/install.py to _install.py: needed to call the function in
the usual way (e.g. pmb.parse.apkbuild()) but still being able to
test the individual functions from these files in the test suite.
We did the same thing for pmb/build/_package.py already.
* Install: New function get_nonfree_packages() returns the non-free
packages that will be installed, based on the user's choice in
"pmbootstrap init" and on the subpackages the device has.
* Added test cases and test data (APKBUILDs) for all new code,
refactored test/test_questions.py to have multiple functions for
testing the various questions / question types from
"pmbootstrap init" instead of having it all in one big function.
This allows to use another aport folder for testing the new
non-free related questions in init.
Clayton Craft
Oliver Smith
Drew DeVault
Daniele Debernardi
lambdadroid
Steffen Pankratz
Idan Horo
Luca Weiss
Martijn Braam
Oliver Smith
NotKit
Bhushan Shah
steamport
Lionel Duboeuf