When running pmbootstrap init, first select device vendor, then device
codename. Also fixed tests for new behavior and added some new ones for
new scenarios.
postmarketOS/pmaports!700 adds a new "deviceinfo_bootimg_dtb_second"
option that places the DTB in the "second" area of the Android boot
image.
Attempt to detect this automatically by checking the extracted
second binary for the FDT magic (0xd00dfeed).
This reverts commit 6fb5b28e2f.
The -i option was removed from fastboot, so we can't use it anymore
unless we fork the package. There was only one device using it,
amazon-thor. I will add a note to the wiki page.
Fixes#1830.
Make sure, that "args.fork_alpine" is always present. Otherwise,
pmbootstrap will fail if the aportgen code is called by anything but
"pmbootstrap aportgen". For example, when the user is adding a new
device during "pmbootstrap init".
Fixes: 54e51759ad ("aportgen: add feature to fork upstream packages")
Remove u-boot from the native_cross_compile list as we now have
crossdirect. Compiling is not terribly slow anymore, and when not using
the "native" method, it is possible to depend on firmware packages like
arm-trusted-firmware-sun50i.
This reverts commit d7d7ccb672.
From https://docs.python.org/3/library/re.html
"Backslashes are not handled in any special way
in a string literal prefixed with 'r'."
Signed-off-by: Steffen Pankratz <kratz00@gmx.de>
Add check for UEVENT_HELPER for kernels >= 4.0.0. Change LBDAF check to
be only required for kernels <5.2.0. Adjust the config format and
checking code to support such range specific checks.
Depend on new pmaports version, where crossdirect uses the native ccache
binary instead of going through the foreign arch ccache first and then
going through crossdirect.
Old:
ccache (foreign) -> crossdirect (native) -> gcc (native)
New:
crossdirect (native) -> ccache (native) -> gcc (native)
Set the PATH to the crossdirect binaries, and don't set CCACHE_PATH or
CCACHE_COMPILERCHECK from pmbootstrap anymore. crossdirect sets the
CCACHE_PATH to /native/usr/bin now, along with all other required
environment variables. CCACHE_COMPILERCHECK isn't necessary anymore,
because ccache will call gcc directly and therefore be able to use the
file's timestamp and size directly. Also passing that would not work
with the current crossdirect package.
Launch native cross compilers inside foreign chroot. Enable by default,
but allow disabling with --no-crossdirect for now. This option and the
distcc-sshd related code will be removed in the future.
This adds flasher support for uuu, a utility used by NXP devices for
flashing images.
The flasher expects a uuu command list script to be installed in the
device rootfs at /usr/share/uuu/flash_script.lst.
This allows building u-boot much faster, previously it used to build
whole u-boot with distcc+qemu cross-compile, now it builds u-boot on
native chroot using cross-compilers.
Related to a proprietary "T-Mobile's WiFi-Calling" feature. It should
not affect normal calls, so it should be safe to disable it. Having it
enabled causes sudo, ip and other commands to hang.
It is dangerous to flash the boot partition on the Ouya. Doing so can
result in a bricked device. Allow deviceinfo to blacklist partitions from
ever being flashed.
Test with flake8: *.py
./test/check_checksums.py:13:13: E117 over-indented
./pmb/config/init.py:97:8: F632 use ==/!= to compare str, bytes, and int literals
./pmb/parse/arguments.py:229:13: E117 over-indented
Increase pakage version and minimum required apk version. The latter
should be done with every new release from now on, so we always have a
recent version there. I've updated the pmbootstrep release checklist
accordingly: https://wiki.postmarketos.org/wiki/Pmbootstrap_release
Allow changing the kernel partition for fastboot and heimdall in
deviceinfo and on the fly while doing "pmbootstrap flasher
flash_kernel". Also allow changing the partition for
"... flash_rootfs" with fastboot (this was only possible with
heimdall so far).
Introduce two new deviceinfo variables:
* flash_fastboot_partition_kernel
* flash_fastboot_partition_system
This is useful for devices with dual partitioning that have boot_a
and boot_b.
This allows embedding multiple firmware binaries into SD images.
Firmware images for most devices that require this functionality consist
mainly of u-boot, but some devices (e.g. librem5) have multiple firmware
images that need to be embedded in the SD image created by pmbootstrap.
This functionality uses two new deviceinfo parameters:
- deviceinfo_sd_embed_firmware: a comma-separated list of
binary:offset (where binary is under /usr/share/firmware)
- deviceinfo_sd_embed_firmware_step_size: The number of bytes for
each increment of the offset specified in the
deviceinfo_sd_embed_firmware (typically 1024 or 2048)
deviceinfo_write_uboot_spl has been obsoleted by these new parameters.
Rename pmb.helpers.devices.list() to
pmb.helpers.devices.list_codenames(). Python already has a list()
function, so we name our function to make the calls to the codenames
listing function inside pmb/helpers/devices.py less confusing.
deviceinfo_codneame holds the device's code name, so we can easily look
it up in the finished postmarketOS installation by reading
/etc/deviceinfo.
Related: postmarketOS/pmaports#157
Make it possible to point the pmaports dir to an existing repository
clone, while not having to give the --aports/-p parameter with every
command.
pmbootstrap --aports=/my/pmaports/path init
If the config file exists already, the dir can also be set with:
pmbootstrap config aports /my/pmaports/path
Adds an optional deviceinfo variable, `deviceinfo_rootfs_image_sector_size`,
which specifies the logical sector size of the device's storage.
Some devices made after 2016 with UFS storage uses 4096 byte sectors
instead of the normal 512 bytes. The partition table in our rootfs
must match, otherwise the root filesystem won't mount on the device.
This change passes the sector size to `losetup` when creating the image
if the deviceinfo specifies it, so the image will have the correct
sector size.
If the deviceinfo doesn't specify the new option, the behaviour
is the same as previous versions of pmbootstrap.
Note that the sector size option only works on Linux 4.14 and above,
so pmbootstrap should be run on a >4.14 computer when installing to
devices with non-standard sector size.
To find if a device needs this parameter, run `fdisk -l` on the device.
If the output shows
`Note: sector size is 4096 (not 512)`
then add `deviceinfo_rootfs_image_sector_size="4096"` to the deviceinfo.
This is needed by the Pixel 3 XL (google-crosshatch) port.
See https://gitlab.com/postmarketOS/pmbootstrap/issues/1696.
Weston and Plasma Mobile might choose to draw on this virtual frame
buffer, just like it happened for the samsung-jflte. Disabling the
USE_VFB option fixed this, so let's make sure we don't have that option
enabled for any kernel.
Multiple -mp arguments can be used to list multiple mirrors:
$ pmbootstrap -mp=first -mp=second chroot -- cat /etc/apk/repositories
This is needed for the new build infrastructure, so we can have a WIP
repository to which we push packages until all of them are up to date,
and then publish all of them at once. Software like KDE/Plasma Mobile,
which expect a lot of packages to be updated from one version to
another will not end up with a half-way through upgrade that way.