In the future, device ports will be located in a subdirectory
below device/... (e.g. device/testing/device-...).
Replace all occurrences of device/* with a glob that checks the
subdirectories instead.
Note: To ensure that this always works properly we should also add some
checks that all devices are indeed located under one of the supported
subdirectories (i.e. testing/community/main).
Change the glob for pmaports to <aports>/**/APKBUILD.
This allows using subdirectories for organization outside of device/
as well.
In general, we should not assume that pmbootstrap considers empty
package directories (without APKBUILD in them). With upcoming changes
this is no longer the case, so lets create an empty file for them.
The QEMU device ports no longer make use of the linux-postmarketos-
stable/mainline kernels, causing the test to fail with
RuntimeError: Selected kernel (stable) is not configured for device qemu-amd64.
Please run 'pmbootstrap init' to select a valid kernel.
Let's configure the test to use the "virt" kernel.
Just counting the number of tries does not prevent the QEMU tests
from running long periods of time. In some situations, the ssh command
will keep trying to reach the destination almost indefinitely.
To make the 5 minutes timeout work correctly we need to:
- Add an appropriate ConnectTimeout to the ssh command
- Don't sleep for another second if ssh already took several seconds
- Check the elapsed time instead of setting a fixed amount of tries
mesa-dri-swrast and mesa-dri-virtio are both provided by mesa-dri-gallium
now, so this option does not have much use anymore. With both selections,
exactly the same packages are installed.
Work around old rust version in Alpine's armhf repository (builder
currently stuck?) compared to other arches. Armv7 is fine, so switch to
that and avoid this error:
error[E0514]: found crate `std` compiled by an incompatible version of rustc
Add a helper class that provides readline-based tab completion and an
extra optional argument "completion_choices" with possible completion
targets.
While at this, also improve paramters documentation for ask() func.
Add new "pmbootstrap status" command, which does a quick health check
for the work dir. As first health check, verify that the chroots are not
too old. Replace the reminder text at the end of "pmbootstrap init" to
tell users to run "pmbootstrap status" instead of "pmbootstrap zap" once
a day before working with pmbootstrap.
Related: #1829
Whenever initializing new chroots, save the date in $WORK/workdir.cfg.
Add pmb.config.workdir.chroots_outdated() to check if it's time to zap
the chroots or not (since we don't update them automatically). Mark them
as outdated after two days.
This will be the first check in "pmbootstrap status" (future patches).
Related: #1829
While at it, also remove unnecessary "#!/usr/bin/env python3" in files
that only get imported, and adjust other empty/comment lines in the
beginnings of the files for consistency.
This makes files easier to read, and makes the pmbootstrap codebase more
consistent with the build.postmarketos.org codebase.
Replace the "Add topdir to import path" boilerplate lines in each test
file with a simple "import pmb_test". Use the "# noqa" comment if
"pmb_test" is not used further in the test file, so flake8 does not
complain about an unused module.
Make the path to the testdata available as pmb_test.const.testdata, and
use pmb.config.pmb_src to access the topdir in all tests.
This is in preparation for new "pmbootstrap status" related tests, which
will have shared test code in test/pmb_test/. Also, this makes the
pmbootstrap codebase more consistent with the bpo codebase, which has a
similar "import bpo_test" mechanism.
At the moment we have a simple subpkgdesc() function that can only
parse "pkgdesc" from subpackages, without support for any variables.
But we have a quite nice variable parser now that can be extended
to work for subpackages.
Simply put this works by:
- Finding the lines that belong to the subpackage function
- Stripping indentation (tab)
- Parsing relevant attributes similar to the apkbuild() function
The "subpackages" in the parsed APKBUILD are replaced by a dict
of subpkgname: {"pkgdesc": "...", "depends": "..."} which are
parsed from the subpackage function (if found).
This makes it possible to get the "depends" of a subpackage.
At the moment we parse all attributes, split them, and eventually
join them back together for variable replacement.
Replacing variables immediately after parsing (before splitting)
has several advantages:
- No need to handle different value types
(e.g. lists by joining them every time they are accessed)
- Variables like depends="$depends ..." are handled directly
by the variable parser
- APKBUILDs are shell scripts, so we match abuild more closely
if variables defined later do not affect previous attributes
Add a shortcut for "git pull --ff-only" in all repositories cloned by
pmbootstrap (currently pmaports and aports_upstream, new pmdevices
repository coming soon).
'pmbootstrap pull' will only update the repositories, if:
* they are on an officially supported branch (e.g. master)
* the history is not conflicting (fast-forward is possible)
* the git workdirs are clean
Otherwise it shows the user a descriptive message about what to do. The
list of supported branches is only "master" right now, and will be
extended in later commits, so we can have a stable branch for pmaports
based on Alpine's releases. More about that in the project direction
2020 issue.
Closes: #1858
When defining a new kernel subpackage with a "-" in it
(e.g. $pkgname-kernel-mainline-modem), then pmbootstrap is unable to
find the function that builds the subpackage:
ERROR: Could not find subpackage function, no line starts with 'kernel_mainline-modem() {'
This is because it assumes that a $pkgname-kernel-<name> subpackage
is built by a kernel_<name> function, but this does not have to be the case.
We should really respect the name of the subpackage function that
is specified when defining the subpackage, but unfortunately it is
stripped away in cut_off_function_names().
For now let's fix this by replacing "-" with "_", but ideally the
APKBUILD parser API should be refactored to expose the subpackage
function in the future.
Install rust (rustc) in native chroot, if it is in the APKBUILD's
build dependencies. Add a test to verify that crossdirect + rust works
as expected.
Closes: #1861
Properly ignore comments at the end of lines, instead of assuming that
all lines below belong to the attribute:
subpackages="$pkgname-dev" # $pkgname-lang
Fixes build.postmarketos.org#61, where pmbootstrap would assume that a
random package provides "make", just because the word "make" is written
somewhere below subpackages=" in the APKBUILD and it is parsed
incorrectly.
While at it, also support the ' character for quotations and detect if
a quotation for a value was started, but there is no end quotation sign
in the rest of the file.
I've added tests, and manually checked that this did not introduce any
parsing bugs for all the APKBUILDs in pmaports.git, by running
'pmbootstrap apkbuild_parse' with the old and new code, and diffing the
result.
Make /home/pmos/build/.git point to the .git dir from pmaports.git, with
a symlink so abuild does not fail.
abuild expects the current working directory to be a subdirectory of a
cloned git repository (e.g. main/openrc from aports.git). If git is
installed, it will try to get the last git commit from that repository,
and place it in the resulting apk (.PKGINFO) as well as use the date
from that commit as SOURCE_DATE_EPOCH (for reproducible builds).
With that symlink, we actually make it use the last git commit from
pmaports.git for SOURCE_DATE_EPOCH and have that in the resulting apk's
.PKGINFO.
Fixes: #1841
When running pmbootstrap init, first select device vendor, then device
codename. Also fixed tests for new behavior and added some new ones for
new scenarios.
postmarketOS/pmaports!700 adds a new "deviceinfo_bootimg_dtb_second"
option that places the DTB in the "second" area of the Android boot
image.
Attempt to detect this automatically by checking the extracted
second binary for the FDT magic (0xd00dfeed).
Packages ending in -dev: just assume that the originating aport has the
same pkgname, except for the -dev at the end. Otherwise we may end up
with the wrong package.
For example, if something depends on plasma-framework-dev, and
plasma-framework is in Alpine, but plasma is in pmaports, then the
regular guess_main() algorithm below would pick plasma instead of
plasma-framework.
Fixes: build.postmarketos.org#52
Remove the recursive check, as it caused an infinite loop. It took a
very long time to complete anyway, even when it worked. The reasoning
for having the recursive check in the first place was, that we would
have device packages with arch=noarch set in the APKBUILD, but which
could only be built for a certain architecture (the device
architecture). Nowadays using arch=noarch in device packages is
forbidden, and we enforce that rule [1]. So the recursive arch check
isn't necessary anymore.
[1] ac6c0a2997
Make sure, that "args.fork_alpine" is always present. Otherwise,
pmbootstrap will fail if the aportgen code is called by anything but
"pmbootstrap aportgen". For example, when the user is adding a new
device during "pmbootstrap init".
Fixes: 54e51759ad ("aportgen: add feature to fork upstream packages")
The important part about this patch is the change for armhf, which
adjusts the hostspec to the one used by Alpine.
Fixes a part of postmarketOS/pmaports#363
This MR add the --fork-alpine argument to the pmboostrap aportgen
command, which downloads the APKBUILD and related files and copies them
into the pmaports/temp folder.
Properly handle the following two cases in APKBUILDs:
* depends="$depends ..."
* depends="${depends} ..."
First I've attempted to refactor the parsing code to do this in a more
generic way. But I've realized that it would make more sense to retire
the python based APKBUILD parsing approach altogether and finally use a
shell script parser. Let's discuss this in #1801.
Be more patient with waiting for processes to start up. From looking at
the logs, it seems that the only reason CI was failing is because we did
not wait long enough.
Compare a version against a check string. This will be used in
"pmbootstrap kconfig check", to only require certain options if the
pkgver is in a specified range.