Enforce the E501 length check of max 79 characters for all files where
this test passes already. We can add more to the list as we adjust them
and eventuelly require the check for all files.
This adds a new commandline flag -E / --extra-space for
specifying the amount of additional space to be added to
the image size to work around cases where the automatically
determined size turns out to not actually be enough.
The value is also asked for in the "Additional options"
section of the interactive mode.
Fixes: #1904
Packages like binutils-*, busybox-static-*, gcc-*, grub-efi-*, musl-*
are only needed for the native architecture during cross compilation.
Don't bother with trying to build them for other arches to save time and
to avoid getting stuck frequently at "armv7/binutils-aarch64" etc.
A few people like to use pmbootstrap on aarch64 hosts (e.g. PineBook
Pro), so let's make it available for aarch64 again when we can build
aarch64 packages natively in CI and bpo. (They do get stuck there right
now, because of qemu user emulation.)
Related: https://gitlab.com/postmarketOS/build.postmarketos.org/-/issues/75
Some Mediatek devices have a special 512-byte header around the zImage
which must be generated so the device boots.
Support for that exists for a while in postmarketOS but detection was
missing. Add that.
This test is failing with Alpine edge, because x86_64 has a different
rustc version than armv7:
found crate `std` compiled by an incompatible version of rustc
Run the test with the latest Alpine stable version instead, where it is
more likely that rustc has the same version across all arches.
Let UI meta-packages specify apps in "pmb_recommends" to be explicitly
installed by default, and not implicitly as dependency of the UI
meta-package ("depends"). Therefore make these apps uninstallable,
without removing the meta-package.
Add pmbootstrap install --no-recommends to disable this feature.
Alpine APKBUILDs have the concept of "provider priorities" that affect
the choice of the provider to install when multiple packages provide
a virtual package.
One use case for this is to allow installation of different firmware
versions. bq-paella can run unsigned firmware, therefore you have the
choice between using the original firmware from the manufacturer, or
a slightly newer version from Qualcomm for the Dragonboard 410c.
We add provides="firmware-qcom-msm8916-wcnss" (the "virtual package")
to both firmware-qcom-db410c-wcnss and firmware-bq-picmt-wcnss.
At this point, attempting to install "firmware-qcom-msm8916-wcnss"
would still fail with apk. (Because it does not know which provider
to install.)
To pick a default we can set e.g. provider_priority=100 for
firmware-qcom-db410c-wcnss (the slightly newer version).
In that case, firmware-qcom-db410c-wcnss should be installed by default.
However, the user can choose to do "apk add firmware-bq-picmt-wcnss"
to override the default choice in case of problems. In that case,
the conflicting firmware-qcom-db410c-wcnss will be automatically removed.
At the moment, pmbootstrap does not respect the "provider_priority" at all.
In the above case, it would always install "firmware-bq-picmt-wcnss"
during "pmbootstrap install" since that has the shortest name.
Extend the pmbootstrap code to pick a provider with the highest priority
(if any of the providers has a priority set).
Copy from current pmaports master, so pmbootstrap doesn't complain about
missing deviceinfo_codename when parsing it. Right now pmbootstrap
doesn't complain about this, but with the next patch it will attempt to
parse the file.
This replaces the year from 1337 to 2012 too, but let's rather have it
slightly more maintainable than introducing a diff for a funny reference.
"Chassis" defines the what kind of device a device is. Currently the
following standardized types exist:
"desktop", "laptop", "convertible", "server", "tablet", "handset",
"watch", "embedded", "vm", "container"
This property is exposed by org.freedesktop.hostname1 (e.g.
openrc-settingsd) and can be used by applications for example to display
appropriate strings instead of "About this phone" for non-phone devices.
Migrate to workdir version 5 and move already built packages into the edge
channel subdir, for example:
$WORK/packages/x86_64/hello-world-1-r5.apk
to:
$WORK/packages/edge/x86_64/hello-world-1-r5.apk
The build.postmarketos.org code has already been adjusted to find built
packages in either directory structure.
Use mirrordir_pmos and mirrordir_alpine from channels.cfg to generate
the mirror URLs for postmarketOS and Alpine, which get written to
/etc/apk/repositories and which postmarketOS uses to download the
APKINDEX files.
Remove hardcoded "master" at the end of the postmarketOS mirror and use
mirrordir_pmos instead (which is "master" for the edge channel). Let the
postmarketOS mirror end in a '/' for consistency with the Alpine mirror
in pmb/config/__init__.py.
Remove obsolete --alpine-version. To experiment with a different Alpine
version, one should pass a custom --config-channels from now on.
Ask for release channel and switch pmaports branch to the related branch
defined in channels.cfg.
Store in pmbootstrap.cfg whether the user chose a channel (boolean). If
the user did not choose a channel yet, suggest the recommended channel
from channels.cfg (currently "edge").
Prepare to base postmarketOS on Alpine stable by parsing the new
channels.cfg file in pmaports.git, that describes which channel
needs which branches and mirror dirs from postmarketOS and Alpine.
Use the information in pmb.helpers.git.get_branches_official() first,
more is coming in follow-up commits.
Read the file from origin/master, so we get the latest fetched version
even if the last checked out master branch is not up-to-date (think of
currently checked out release branch instead of master, master will
never be updated to point to latest origin/master). Allow to override
the file with a new --config-channels parameter.
Related: https://postmarketos.org/channels.cfg
Let apkbuild-lint check options again, and pass the pmbootstrap specific
options with the new CUSTOM_VALID_OPTIONS variable. Add a test case and
adjust pmb.helpers.lint.check to return the output of apkbuild-lint, so
we can properly test it.
Related: https://gitlab.alpinelinux.org/Leo/atools/-/merge_requests/28
Fixes: pmaports#553
The `mesa-dri-swrast` package was merged into `mesa-dri-gallium` in Alpine.
(See 298e20d04f)
The old alias might be removed in the future, so change the generated APKBUILDs
to depend on `mesa-dri-gallium` instead.
Don't assume that the device selected in "pmbootstrap init" is in the
testing subdir anymore. The default device, qemu-amd64, was recently
moved to main, so this does not hold up anymore. Instead, use
pmb.helpers.pmaports.find to figure out the currect dir.
No build is necessary if pmaport can't be built for given arch.
pmbootstrap must use Alpine's binary package in that case, even if the
pmaport version is higher than Alpine's binary package version.
Fixes: #1897
The --no-depends option is supposed to stop pmbootstrap if it was
instructed to build a package, but a dependency must be built first. So
far, this only covers the case if there is no binary package for a dependency.
Make it stop if the binary package exists, but is outdated, too.
Fixes: #1895
Use the timestamp of .git/FETCH_HEAD in each git repository, to
determine if too much time has passed since the last fetch/pull.
Modify pmb.helpers.git.clone, so FETCH_HEAD is always created if it does
not exist (because "git clone" would not create it).
Related: #1829
Extend "pmbootstrap status" with checks for all git repositories,
derived from relevant checks in pmb.helpers.git.pull (using shared
code):
* on official branch
* workdir is clean
* tracking proper remote
* up to date
Related: #1829
In the future, device ports will be located in a subdirectory
below device/... (e.g. device/testing/device-...).
Replace all occurrences of device/* with a glob that checks the
subdirectories instead.
Note: To ensure that this always works properly we should also add some
checks that all devices are indeed located under one of the supported
subdirectories (i.e. testing/community/main).
Change the glob for pmaports to <aports>/**/APKBUILD.
This allows using subdirectories for organization outside of device/
as well.
In general, we should not assume that pmbootstrap considers empty
package directories (without APKBUILD in them). With upcoming changes
this is no longer the case, so lets create an empty file for them.
The QEMU device ports no longer make use of the linux-postmarketos-
stable/mainline kernels, causing the test to fail with
RuntimeError: Selected kernel (stable) is not configured for device qemu-amd64.
Please run 'pmbootstrap init' to select a valid kernel.
Let's configure the test to use the "virt" kernel.
Just counting the number of tries does not prevent the QEMU tests
from running long periods of time. In some situations, the ssh command
will keep trying to reach the destination almost indefinitely.
To make the 5 minutes timeout work correctly we need to:
- Add an appropriate ConnectTimeout to the ssh command
- Don't sleep for another second if ssh already took several seconds
- Check the elapsed time instead of setting a fixed amount of tries
mesa-dri-swrast and mesa-dri-virtio are both provided by mesa-dri-gallium
now, so this option does not have much use anymore. With both selections,
exactly the same packages are installed.
Work around old rust version in Alpine's armhf repository (builder
currently stuck?) compared to other arches. Armv7 is fine, so switch to
that and avoid this error:
error[E0514]: found crate `std` compiled by an incompatible version of rustc
Add a helper class that provides readline-based tab completion and an
extra optional argument "completion_choices" with possible completion
targets.
While at this, also improve paramters documentation for ask() func.
Add new "pmbootstrap status" command, which does a quick health check
for the work dir. As first health check, verify that the chroots are not
too old. Replace the reminder text at the end of "pmbootstrap init" to
tell users to run "pmbootstrap status" instead of "pmbootstrap zap" once
a day before working with pmbootstrap.
Related: #1829
Whenever initializing new chroots, save the date in $WORK/workdir.cfg.
Add pmb.config.workdir.chroots_outdated() to check if it's time to zap
the chroots or not (since we don't update them automatically). Mark them
as outdated after two days.
This will be the first check in "pmbootstrap status" (future patches).
Related: #1829
While at it, also remove unnecessary "#!/usr/bin/env python3" in files
that only get imported, and adjust other empty/comment lines in the
beginnings of the files for consistency.
This makes files easier to read, and makes the pmbootstrap codebase more
consistent with the build.postmarketos.org codebase.
Replace the "Add topdir to import path" boilerplate lines in each test
file with a simple "import pmb_test". Use the "# noqa" comment if
"pmb_test" is not used further in the test file, so flake8 does not
complain about an unused module.
Make the path to the testdata available as pmb_test.const.testdata, and
use pmb.config.pmb_src to access the topdir in all tests.
This is in preparation for new "pmbootstrap status" related tests, which
will have shared test code in test/pmb_test/. Also, this makes the
pmbootstrap codebase more consistent with the bpo codebase, which has a
similar "import bpo_test" mechanism.
At the moment we have a simple subpkgdesc() function that can only
parse "pkgdesc" from subpackages, without support for any variables.
But we have a quite nice variable parser now that can be extended
to work for subpackages.
Simply put this works by:
- Finding the lines that belong to the subpackage function
- Stripping indentation (tab)
- Parsing relevant attributes similar to the apkbuild() function
The "subpackages" in the parsed APKBUILD are replaced by a dict
of subpkgname: {"pkgdesc": "...", "depends": "..."} which are
parsed from the subpackage function (if found).
This makes it possible to get the "depends" of a subpackage.
At the moment we parse all attributes, split them, and eventually
join them back together for variable replacement.
Replacing variables immediately after parsing (before splitting)
has several advantages:
- No need to handle different value types
(e.g. lists by joining them every time they are accessed)
- Variables like depends="$depends ..." are handled directly
by the variable parser
- APKBUILDs are shell scripts, so we match abuild more closely
if variables defined later do not affect previous attributes
Add a shortcut for "git pull --ff-only" in all repositories cloned by
pmbootstrap (currently pmaports and aports_upstream, new pmdevices
repository coming soon).
'pmbootstrap pull' will only update the repositories, if:
* they are on an officially supported branch (e.g. master)
* the history is not conflicting (fast-forward is possible)
* the git workdirs are clean
Otherwise it shows the user a descriptive message about what to do. The
list of supported branches is only "master" right now, and will be
extended in later commits, so we can have a stable branch for pmaports
based on Alpine's releases. More about that in the project direction
2020 issue.
Closes: #1858
When defining a new kernel subpackage with a "-" in it
(e.g. $pkgname-kernel-mainline-modem), then pmbootstrap is unable to
find the function that builds the subpackage:
ERROR: Could not find subpackage function, no line starts with 'kernel_mainline-modem() {'
This is because it assumes that a $pkgname-kernel-<name> subpackage
is built by a kernel_<name> function, but this does not have to be the case.
We should really respect the name of the subpackage function that
is specified when defining the subpackage, but unfortunately it is
stripped away in cut_off_function_names().
For now let's fix this by replacing "-" with "_", but ideally the
APKBUILD parser API should be refactored to expose the subpackage
function in the future.
Install rust (rustc) in native chroot, if it is in the APKBUILD's
build dependencies. Add a test to verify that crossdirect + rust works
as expected.
Closes: #1861
Properly ignore comments at the end of lines, instead of assuming that
all lines below belong to the attribute:
subpackages="$pkgname-dev" # $pkgname-lang
Fixes build.postmarketos.org#61, where pmbootstrap would assume that a
random package provides "make", just because the word "make" is written
somewhere below subpackages=" in the APKBUILD and it is parsed
incorrectly.
While at it, also support the ' character for quotations and detect if
a quotation for a value was started, but there is no end quotation sign
in the rest of the file.
I've added tests, and manually checked that this did not introduce any
parsing bugs for all the APKBUILDs in pmaports.git, by running
'pmbootstrap apkbuild_parse' with the old and new code, and diffing the
result.
Make /home/pmos/build/.git point to the .git dir from pmaports.git, with
a symlink so abuild does not fail.
abuild expects the current working directory to be a subdirectory of a
cloned git repository (e.g. main/openrc from aports.git). If git is
installed, it will try to get the last git commit from that repository,
and place it in the resulting apk (.PKGINFO) as well as use the date
from that commit as SOURCE_DATE_EPOCH (for reproducible builds).
With that symlink, we actually make it use the last git commit from
pmaports.git for SOURCE_DATE_EPOCH and have that in the resulting apk's
.PKGINFO.
Fixes: #1841
When running pmbootstrap init, first select device vendor, then device
codename. Also fixed tests for new behavior and added some new ones for
new scenarios.
postmarketOS/pmaports!700 adds a new "deviceinfo_bootimg_dtb_second"
option that places the DTB in the "second" area of the Android boot
image.
Attempt to detect this automatically by checking the extracted
second binary for the FDT magic (0xd00dfeed).
Packages ending in -dev: just assume that the originating aport has the
same pkgname, except for the -dev at the end. Otherwise we may end up
with the wrong package.
For example, if something depends on plasma-framework-dev, and
plasma-framework is in Alpine, but plasma is in pmaports, then the
regular guess_main() algorithm below would pick plasma instead of
plasma-framework.
Fixes: build.postmarketos.org#52
Remove the recursive check, as it caused an infinite loop. It took a
very long time to complete anyway, even when it worked. The reasoning
for having the recursive check in the first place was, that we would
have device packages with arch=noarch set in the APKBUILD, but which
could only be built for a certain architecture (the device
architecture). Nowadays using arch=noarch in device packages is
forbidden, and we enforce that rule [1]. So the recursive arch check
isn't necessary anymore.
[1] ac6c0a2997
Make sure, that "args.fork_alpine" is always present. Otherwise,
pmbootstrap will fail if the aportgen code is called by anything but
"pmbootstrap aportgen". For example, when the user is adding a new
device during "pmbootstrap init".
Fixes: 54e51759ad ("aportgen: add feature to fork upstream packages")
The important part about this patch is the change for armhf, which
adjusts the hostspec to the one used by Alpine.
Fixes a part of postmarketOS/pmaports#363
This MR add the --fork-alpine argument to the pmboostrap aportgen
command, which downloads the APKBUILD and related files and copies them
into the pmaports/temp folder.
Properly handle the following two cases in APKBUILDs:
* depends="$depends ..."
* depends="${depends} ..."
First I've attempted to refactor the parsing code to do this in a more
generic way. But I've realized that it would make more sense to retire
the python based APKBUILD parsing approach altogether and finally use a
shell script parser. Let's discuss this in #1801.
Be more patient with waiting for processes to start up. From looking at
the logs, it seems that the only reason CI was failing is because we did
not wait long enough.
Compare a version against a check string. This will be used in
"pmbootstrap kconfig check", to only require certain options if the
pkgver is in a specified range.
Download all sources and verify their checksums.
This will be used in pmaports.git CI, if ci:skip-build is set in the
commit message (currently it just skips the build, and we don't test if
the source checksums are valid or not).
The qemu test executes a pmbootstrap instance with
pmb.helpers.run.user(). Use the --details-to-stdout flag from now on for
the started pmbootstrap process, so it is not silent when downloading
packages with apk, and will therefore not run into the timeout of the
parent process (which kills processes that are silent for more than five
minutes by default).
This fixes the test in our CI infrastructure.
Explicitly depend on mpc1. Our generated gcc aports use the !tracedeps
option, so we need to explicitly set the libraries it depends on.
This has mostly not been an issue, as we are installing our gcc
packages together with Alpine's gcc package, which causes the libraries
to get installed anyway.
Related: pmaports#236
Packages can add pmb:strict to their options to enable the --strict
mode. This can be used if packages need to get build in a clean chroot
or their make dependencies need to get removed.
Aborts the build if any dependencies would have to be build first. This
is useful for build.postmarketos.org, because we want to build exactly
one package in one build job. If dependencies would need to be built, we
made a mistake earlier, and not aborting the build makes it harder to
find that orginal mistake.
When a pmaport can not be built for the desired architecture, fall back
to the binary package (from postmarketOS or Alpine) if it exists. This
allows us to provide an updated version of mesa for arm arches, but
using Alpine's mesa package on x86* arches.
Adjust the stub function in test_generate_output_format() to accept the
replace_subpkgnames argument, which was introduced in the previous
commit ("repo_missing: return pkgnames, not subpkgnames").
For some reason, this CI test only ran after the MR was merged to master
and not when it ran in the MR's branch. I'm investigating this.
"breeze-icons" depends on "qt5-qtbase-dev", but
"pmbootstrap repo_missing" should return "qt5-qtbase" instead.
This patch fixes it, as one can see with:
$ pmbootstrap repo_missing --built breeze-icons --overview
Provides a quick way to incrementally compile a kernel and push it to
device.
Example usage.
Compile the kernel:
$ cd /src/linux/
$ source /src/pmbootstrap/helpers/envkernel.sh
$ make tegra_postmarketos_defconfig
$ make -jX
Package kernel and flash to device:
$ pmbootstrap build --envkernel linux-samsung-p4wifi
$ pmbootstrap flasher flash_kernel
Modify kernel source then incremental compile, package, and flash:
$ make -jX
$ pmbootstrap build --envkernel linux-samsung-p4wifi
$ pmbootstrap flasher flash_kernel
Test with flake8: *.py
./test/check_checksums.py:13:13: E117 over-indented
./pmb/config/init.py:97:8: F632 use ==/!= to compare str, bytes, and int literals
./pmb/parse/arguments.py:229:13: E117 over-indented
This drops the --apparent-size parameter when calculating the size
required for rootfs, which seemed to return a size that was too small
for some devices. This also includes specifying the number of inodes to
support when formatting rootfs.
Fixes#1717
APKBUILD should be indented with tabs not spaces.
This also resolves a bug which the replace_functions feature was always
trimming off the beginning of a line.
For example:
replace_functions = {"build": "return 0"}
would be formatted as "rn 0".
Clear the test blacklist for all tests, except for the QEMU test (which
runs on its own on a special runner). All other tests that were in the
blacklist, except for the aportgen test, had already been moved to
pmaports.git. Keeping them out of the blacklist makes it less confusing.
Now all tests are running in CI again.
test_aportgen.py fails because some test data is missing.
Make the test pass by fixing the test data with the following changes:
- Update testdata pmaports/cross/*
- Don't git ignore test/testdata/aportgen directory
- Add testdata aports/main/* from upstream Alpine Linux aports
Patch files in pmaports/cross/binutils-armhf were removed, as they are
not needed to test the pmbootstrap code.
Add a new action that lists all aports, for which no binary packages
exist. Only list packages that can be built for the relevant arch
(specified with --arch). This works recursively: when a package can be
built for a certain arch, but one of its dependencies
(or their depends) can not be built for that arch, then don't list it.
This action will be used for the new sr.ht based build infrastructure,
to figure out which packages need to be built ahead of time (so we can
trigger each of them as single build job). Determining the order of the
packages to be built is not determined with pmbootstrap, the serverside
code of build.postmarketos.org takes care of that.
For testing purposes, a single package can also be specified and the
action will list if it can be built for that arch with its
dependencies, and what needs to be built exactly.
Add pmb/helpers/package.py to hold functions that work on both pmaports
and (binary package) repos - in contrary to the existing
pmb/helpers/pmaports.py (see previous commit) and pmb/helpers/repo.py,
which only work with one of those.
Refactoring:
* pmb/helpers/pmaports.py: add a get_list() function, which lists all
aports and use it instead of writing the same glob loop over and over
* add pmb.helpers.pmaports.get(), which finds an APKBUILD and parses it
in one step.
* rename pmb.build._package.check_arch to ...check_arch_abort to
distinguish it from the other check_arch function
Move find_aport() and find_aport_guess_main() from pmb/build/other.py
to the new file pmb/helpers/pmaports.py.
Finding aports is not only needed when building packages, hence it
makes sense to move it out of pmb.build. The pmb/helpers/pmaports.py
file will have more pmaports related functions in a follow up commit.
Find the main package by assuming it is a prefix of the subpkgname. We
do that, because in some APKBUILDs the subpkgname="" variable gets
filled with a shell loop and the APKBUILD parser in pmbootstrap can't
parse this right. (Intentionally, we don't want to implement a full
shell parser.)
Use the device's architecture instead of noarch. Because the device
packages should never be built for other architectures, even if all
depends can be built for other arches as well.
This simplifies package building as part of the new build
infrastructure effort.
All existing pmaports will be changed shortly, along with a test case
in pmaports.
When the timeout occurs it is important to ensure clean up of child
processes. Killing only the direct process created by a command can
leave child processes running.
For example a pmbootstrap.py install will run apk add. This run command
creates multiple processes as follows:
(cmd line arguments snipped for readability)
$ ps -e -o pid,ppid,pgid,cmd
PID PPID PGID CMD
31738 23247 31738 python3 ./pmbootstrap.py -t 15 install --no-fde
31746 31738 31738 sudo env -i /bin/sh -c ... ;apk --no-progress add
31747 31746 31738 /bin/sh -c ... ;apk --no-progress add
31748 31747 31738 apk --no-progress add
The root process of the run command is PID 31746. We want to kill
the child processes too. Otherwise only running kill -9 31746 will leave
the processes 31747 and 31748 running.
This commit adds a test case, which makes sure that the KDE framework
and plasma framework version are always the same.
Additional changes:
* APKBUILD parser parses the URL now (that's the best way I found to
categorize the KDE aports in frameworks and other)
* Changed single quotes to double quotes in KDE APKBUILDs, so the
parser doesn't include the single quotes in the parsed result
* Added the test case to the gitlab CI config
Overview:
Since Alpine updated to distcc 3.3 last week, pmbootstrap wasn't able to use
distcc for cross compilation anymore. It always falled back to running the
compiler in QEMU (which works, but is a lot slower). The reason for that is,
that distcc requires all compilers that are being used in a whitelist now.
This partially fixes CVE-2004-2687 in distccd, which allowed trivial remote
code execution by any process connecting to the distccd server. We only run
distccd on localhost, but still this can be used for privilege escalation of
sandboxed processes running on the host system (not part of pmbootstrap
chroots).
Because the CVE is only partially fixed (see the comment in
`pmb/chroot/distccd.py` for details), we make sure that only the building
chroots can talk to the distcc server by running distcc over ssh.
Details:
* Completely refactored `pmb/chroot/distccd.py` to run distcc over ssh
* Store the running distcc server's arguments as JSON now, not as INI
* Make debugging distcc issues easy:
* Set DISTCC_BACKOFF_PERIOD=0, so the distcc client will not ignore the
server after errors happened (this masks the original error!)
* New pmbootstrap parameters:
* `--distcc-nofallback`: avoids falling back to compiling with QEMU and not
throwing an error
* `--ccache-disable`: avoid ccache (when the compiler output is cached,
distcc does not get used)
* `--verbose` prints verbose output of the distcc too
* New test case, that uses the new pmbootstrap parameters to force
compilation through distcc, and shows the output of distcc and distccd in
verbose mode on error (as well as the log of sshd)
All firmware packages go into subpackages nowadays, so we have them
optional. The `test/test_aports.py` file has a test case, that makes
sure that there are no firmware packages in the `depends` of a device
package. So far we have only checked for `firmware-*` and
`linux-firmware`, this commit makes it check for `linux-firmware*` as
well.
In addition, the URL displayed in the "Please use kernel subpackages"
message has been fixed (points to devicepkg instead of deviceinfo now).
In gitlab, there is no extra CI job running for commits in a merge
request (MR). This means, we can't run different code in a MR against
"master".
So instead of only checking whether all devices are booting if there's
a MR against master, always perform this check.
I've edited the message slightly, so it's clear that it's only required
to have the devices booting when making a merge request against master.
Follow-up to !1373, where `pmbootstrap flasher flash_system` was
replaced with `pmbootstrap flasher flash_rootfs`. We still had used
terms like "system partition" in a lot of places.
This commit replaces it everywhere, so it's clear that we're talking
about the pmOS rootfs (which may or may not be installed to Android's
system partition).
The test suite needed a `pmbootstrap shutdown` after running through,
before it could successfully run again.
Explanation:
This was caused by `test/test_pkgrel_bump.py`, which creates a
temporary work folder with every subfolder ("chroot_native",
"cache_apk_x86_64", ...) linked to the original work folder except for
the "packages" folder. At the end of the test case,
`pmbootstrap shutdown` gets executed and is expected to umount
everything as usual. But it does not umount anything because of the
symlinks, so `work/chroot_native/mnt/pmbootstrap-packages` points to
the fake packages folder of that test case, even after it is finished.
As a result, any test case that tries to access the packages folder in
the native chroot, will fail until `pmbootstrap shutdown` gets called.
Detailed Changes:
* Umount all folders inside the work folder, even if these are symlinks
* Remove obsolete reference to "disable timestamp based rebuilds" in a
comment in `test/test_pkgrel_bump.py`
* Run `pmbootstrap work_migrate` and `pmbootstrap shutdown` at the
beginning of `test/testcases_fast.sh`, in case the pkgrel_bump test
case was aborted before it could properly shutdown and to make it
more robust in general (user may have changed the mountpoints, work
folder may need to be migrated)
This makes debugging much easier, because the relevant log messages
before the crash can always be found at the bottom of the log files,
and not somewhere in the middle.
If the test case couldn't connect to the VM with SSH, it used to fail
with a Python error of accessing the 'missing' variable without having
it defined.
With this commit, it prints out 'Could not connect to the VM via SSH'
instead.
This commit adds two new ignores to the flake8 call:
* W504 line break after binary operator
* W605 invalid escape sequence 'x'
Without these, newer flake8 versions, such as the one shipped by Arch
Linux, don't run through on the code base (which leads to not running
it at all locally, only in CI).
Additional changes:
* Don't give the exception instance of subprocess.CalledProcessError a
name, so it does not trigger F841
* Dont' advise to run "autopep8" anymore, because that will likely
touch unrelated code.
For reference, here is the list of error codes:
https://pycodestyle.readthedocs.io/en/latest/intro.html#error-codes
We are analyzing the `boot.img` with `file` before we send it to
`unpackbootimg`. File does not recognize all kinds of `boot.img` files,
which `unpackbootimg` can extract, so we need a way to skip this check.
Details:
* Add `-f` parameter, continues extraction with a warning if the file
seems to be invalid
* Tell the user that `-f` can be used if the `boot.img` is invalid and
it's not specified
* Consistent spelling of `boot.img` instead of `bootimg` in messages
Fixes#1608
* Travis and Coveralls badges
* aports: instead of <https://github.com/postmarketOS>, use
<https://postmarketos.org>
* References to full URLs to issues and pull requests replaced with
a hash and the number
* grsec check: simplify error message, remove link to github issue
(nobody is using that anymore anyway)
* change "pmbootstrap kconfig_check" to "pmbootstrap kconfig check"
* change "pmbootstrap menuconfig" to "pmbootstrap kconfig edit [-x|-g]"
(with legacy alias, because the first syntax was referenced to a lot)
* enable X11 interfaces: -x: xconfig, -g: gconfig
* new function to copy the xauthority file:
pmb.chroot.other.copy_xauthority()
* remove menufconfig() function from the kernel template and all kernel
aports ([skip ci] because it would rebuild all kernels and run out of
time). Alpine has dropped this as well, and it wouldn't work with the
new code anyway.
armhf tends to be outdated, just like it is right now. The Alpine
aports have binutils-2.30-r2, and the x86_64 version has that version
as well. But the armhf version is still at -r1, which caused the test
case to fail.
Changes:
* `helpers/envkernel.sh`:
* installs everything needed for kernel compilation in the native
chroot
* mounts the kernel source to `/mnt/linux` inside the chroot
* creates `/mnt/linux/.output` and chowns it to the `pmos` user, that
folder will be used for the kernel build output
* sets up aliases for `make`, `pmbootstrap`, `pmbroot`, `kernelroot`
* new action `pmbootstrap work_migrate`: does the interactive work
folder migration if necessary, otherwise it doesn't output anything
* when calling this first, we can safely use all other commands
non-interactively without showing the output
Benefits:
* Fast setup (especially for people who are new to kernel
compilation
* No need to figure out distribution specific package names
(cross compilers!)
* No need to do a test build just to verify that the right
packages are installed
* Less error prone
* The right dependencies are always installed
* `ARCH` and `CROSS_COMPILE` variables always get set automatically
and based on `deviceinfo_arch`
* If the build environment is broken for some reason, just zap and
start over
* Easy to reproduce problems
Notes:
* `make menuconfig` works as well
* Sourcing was tested with `zsh`, `bash` and `fish`, it should be easy to
extend for other shells
`pmbootstrap pkgrel_bump --auto` automatically increases the pkgrel for
packages linking against libraries, which don't exist anymore (because
the soname has been changed). The feature is explained in detail in
The previous implementation did not detect soname breakage, when a
subpackage linked against a certain library, but the main package
did not (e.g. `qt5-qtbase-mysql` and `qt5-qtbase`). This was, because
we iterated over the aports/* to find the packages to be checked.
To fix this, we are iterating over the packages found in the APKINDEX
files instead (of both the locally compiled packages and the downloaded
index from the pmOS mirror).
Details:
* `pmb/helpers/pkgrel_bump.py`:
* Rewrite `auto_apkindex_package()` to act upon a given parsed
`aport` and `apk` (from the index) instead of finding the `apk`
dict by itself (we need it earlier anyway).
* Rewrite `auto()` to iterate over APKINDEX files instead of aports
* Skip packages already found, so the `pkgrel` does not get
increased multiple times when the same package was found in
multipe index files.
* Put the package name at the beginning of the log messages to make
them more readable
* testdata: Create a new `testsubpkg` aport, where only the subpackage
links against `testlib`
* Adjust testing code to test everything with `testsubpkg` as well.
NOTE: This makes the command a bit slower, but we could improve
performance again by smart caching of `pmb.parse.apkindex.depends()`.
This could come in a future PR, the important part here is that the
command is bug-free again with this fix.
* As discussed in IRC/matrix, we're removing `linux-postmarketos-lts`
for now. The kernel isn't used right now, and we save lots of
maintenance effort with not updating it every week or so.
* new config option `"kernel"` with possible values:
`"downstream", "mainline", "stable"` (downstream is always
`linux-$devicename`)
* ask for the kernel during `pmbootstrap init` if the device package
has kernel subpackages and install it in `_install.py`
* postmarketos-mkinitfs: display note instead of exit with error when
the `deviceinfo_dtb` file is missing (because we expect it to be
missing for downstream kernels)
* device-sony-amami:
* add kernel subpackages for downstream, mainline
* set `deviceinfo_dtb`
* device-qemu-amd64: add kernel subpackages for stable, lts, mainline
* test cases and test data for new functions
* test case that checks all aports for right usage of the feature:
* don't mix specifying kernels in depends *and* subpackages
* 1 kernel in depends is maximum
* kernel subpackages must have a valid name
* Test if devices packages reference at least one kernel
* Remove `_build_device_depends_note()` which informs the user that
`--ignore-depends` can be used with device packages to avoid building
the kernel. The idea was to make the transition easier after a change
we did months ago, and now the kernel doesn't always get built before
building the device package so it's not relevant anymore.
* pmb/chroot/other.py:
* Add autoinstall=True to kernel_flavors_installed(). When the flag
is set, the function makes sure that at least one kernel for the
device is installed.
* Remove kernel_flavor_autodetect() function, wherever it was used,
it has been replaced with kernel_flavors_installed()[0].
* pmb.helpers.frontend.py: remove code to install at least one kernel,
kernel_flavors_installed() takes care of that now.
Add a simple script, that checks whether all device's codenames can be
found in the device overview in the wiki. This way we're always sure
that every device is documented in the wiki's device table.
* Save "" (empty string) in the user's config as hostname if the user
let it default to the name of the device. That way, when the device
gets changed, the user won't get the old device's name as hostname
by accident.
* Add a test case
We have a test case, that performs full installations with with XFCE4
and Plasma Mobile. After each installation is through, we run
"pmbootstrap qemu" and connect to the VM via SSH to check for specific
running processes.
Before this commit, we assumed that the boot takes 90 seconds at most
and then the processes should exist. But sometimes the boot is faster
(so Travis waits just doing nothing) and sometimes it is slower (which
causes the test case to fail), all depending on the current workload
of the Travis CI servers. Now we try to find the processes we're
interested in each second for 3 minutes until we either succeed or
reach the time limit.
* Moved the `script` and `after_failure` sections of `.travis.yml`
to extra files in a new `.travis/` folder
* Copy paste `.travis/common.sh` from Alpine's aport. They have neat
formatting functions in there for folding
* Add a folding block around each script that gets called
* Use native tracebacks in pytest. These are the same as we see when
pmbootstrap crashes usually, instead of printing out the entire
function that causes an error. I think this makes the error output
easier to read.
In order to get cross-compilers, we generate a few aports (e.g.
binutils-armhf, gcc-armhf) automatically from Alpine's aports.
pmbootstrap was already able to perform a git checkout of Alpine's
aports repository. But it needed to be manually updated. Otherwise
the `pmbootstrap aportgen` command could actually downgrade the aport
instead of updating it to the current version.
After thinking about adding a dedicated pmbootstrap command for
updating git repositories, I thought it would be better to not open
that can of worms (pmbootstrap as general git wrapper? no thanks).
The solution implemented here compares the upstream aport version of
the git checkout of a certain package (e.g. gcc for gcc-armhf) with the
version in Alpine's binary package APKINDEX. When the aport version is
lower than the binary package version, it shows the user how to update
the git repository with just one command:
pmbootstrap chroot --add=git --user -- \
git -C /mnt/pmbootstrap-git/aports_upstream pull
Changes:
* `pmb.aportgen.core.get_upstream_aport()`: new function, that returns
the absolute path to the upstream aport on disk, after checking the
version of the aport against the binary package.
* Use that new function in pmb.aportgen.gcc and pmb.aportgen.binutils
* New function `pmb.helpers.repo.alpine_apkindex_path()`: updates the
APKINDEX if necessary and returns the absolute path to the APKINDEX.
This code was basically present already, but not as function, so now
we have a bit less overhead there.
* `pmbootstrap chroot`: new `--user` argument
* `pmb.parse.apkbuild`: make pkgname check optional, as it fails with
the official gcc APKBUILD before we modify it (the current APKBUILD
parser is not meant to be perfect, as this would require a full shell
parsing implementation).
* Extended `test_aportgen.py` and enabled it by default in
`testcases_fast.sh`. Previously it was disabled due to traffic
concerns (cloning the aports repo, but then again we do a full KDE
plasma mobile installation in Travis now, so that shouldn't matter
too much).
* `testcases_fast.sh`: With "test_aport_in_sync_with_git" removed
from the disabled-by-default list (left over from timestamp based
rebuilds), there were no more test cases disabled by default. I've
changed it, so now the qemu_running_processes test case is disabled,
and added an `--all` parameter to the script to disable no test
cases. Travis runs with the `--all` parameter while it's useful to
do a quick local test without `--all` in roughly 2 minutes instead of
10.
* `aports/cross/binutils-*`: Fix `_mirror` variable to point to current
default Alpine mirror (so the aportgen testcase runs through).
Oliver Smith
Johannes Marbach
timbz
Antoine Fontaine
Ralf Rachinger
Luca Weiss
Pellegrino Prevete
Minecrell
Anjandev Momi
Daniele Debernardi
Alexey Min
lambdadroid
Idan Horo
Oliver Smith
Nick Reitemeyer
Robert Yang
Clayton Craft
Grant Miller
Clayton Craft
steamport
George Hopkins
BK