Enforce the E501 length check of max 79 characters for all files where
this test passes already. We can add more to the list as we adjust them
and eventuelly require the check for all files.
This adds a new commandline flag -E / --extra-space for
specifying the amount of additional space to be added to
the image size to work around cases where the automatically
determined size turns out to not actually be enough.
The value is also asked for in the "Additional options"
section of the interactive mode.
Fixes: #1904
Packages like binutils-*, busybox-static-*, gcc-*, grub-efi-*, musl-*
are only needed for the native architecture during cross compilation.
Don't bother with trying to build them for other arches to save time and
to avoid getting stuck frequently at "armv7/binutils-aarch64" etc.
A few people like to use pmbootstrap on aarch64 hosts (e.g. PineBook
Pro), so let's make it available for aarch64 again when we can build
aarch64 packages natively in CI and bpo. (They do get stuck there right
now, because of qemu user emulation.)
Related: https://gitlab.com/postmarketOS/build.postmarketos.org/-/issues/75
Some Mediatek devices have a special 512-byte header around the zImage
which must be generated so the device boots.
Support for that exists for a while in postmarketOS but detection was
missing. Add that.
This test is failing with Alpine edge, because x86_64 has a different
rustc version than armv7:
found crate `std` compiled by an incompatible version of rustc
Run the test with the latest Alpine stable version instead, where it is
more likely that rustc has the same version across all arches.
Let UI meta-packages specify apps in "pmb_recommends" to be explicitly
installed by default, and not implicitly as dependency of the UI
meta-package ("depends"). Therefore make these apps uninstallable,
without removing the meta-package.
Add pmbootstrap install --no-recommends to disable this feature.
Alpine APKBUILDs have the concept of "provider priorities" that affect
the choice of the provider to install when multiple packages provide
a virtual package.
One use case for this is to allow installation of different firmware
versions. bq-paella can run unsigned firmware, therefore you have the
choice between using the original firmware from the manufacturer, or
a slightly newer version from Qualcomm for the Dragonboard 410c.
We add provides="firmware-qcom-msm8916-wcnss" (the "virtual package")
to both firmware-qcom-db410c-wcnss and firmware-bq-picmt-wcnss.
At this point, attempting to install "firmware-qcom-msm8916-wcnss"
would still fail with apk. (Because it does not know which provider
to install.)
To pick a default we can set e.g. provider_priority=100 for
firmware-qcom-db410c-wcnss (the slightly newer version).
In that case, firmware-qcom-db410c-wcnss should be installed by default.
However, the user can choose to do "apk add firmware-bq-picmt-wcnss"
to override the default choice in case of problems. In that case,
the conflicting firmware-qcom-db410c-wcnss will be automatically removed.
At the moment, pmbootstrap does not respect the "provider_priority" at all.
In the above case, it would always install "firmware-bq-picmt-wcnss"
during "pmbootstrap install" since that has the shortest name.
Extend the pmbootstrap code to pick a provider with the highest priority
(if any of the providers has a priority set).
Copy from current pmaports master, so pmbootstrap doesn't complain about
missing deviceinfo_codename when parsing it. Right now pmbootstrap
doesn't complain about this, but with the next patch it will attempt to
parse the file.
This replaces the year from 1337 to 2012 too, but let's rather have it
slightly more maintainable than introducing a diff for a funny reference.
"Chassis" defines the what kind of device a device is. Currently the
following standardized types exist:
"desktop", "laptop", "convertible", "server", "tablet", "handset",
"watch", "embedded", "vm", "container"
This property is exposed by org.freedesktop.hostname1 (e.g.
openrc-settingsd) and can be used by applications for example to display
appropriate strings instead of "About this phone" for non-phone devices.
Migrate to workdir version 5 and move already built packages into the edge
channel subdir, for example:
$WORK/packages/x86_64/hello-world-1-r5.apk
to:
$WORK/packages/edge/x86_64/hello-world-1-r5.apk
The build.postmarketos.org code has already been adjusted to find built
packages in either directory structure.
Use mirrordir_pmos and mirrordir_alpine from channels.cfg to generate
the mirror URLs for postmarketOS and Alpine, which get written to
/etc/apk/repositories and which postmarketOS uses to download the
APKINDEX files.
Remove hardcoded "master" at the end of the postmarketOS mirror and use
mirrordir_pmos instead (which is "master" for the edge channel). Let the
postmarketOS mirror end in a '/' for consistency with the Alpine mirror
in pmb/config/__init__.py.
Remove obsolete --alpine-version. To experiment with a different Alpine
version, one should pass a custom --config-channels from now on.
Ask for release channel and switch pmaports branch to the related branch
defined in channels.cfg.
Store in pmbootstrap.cfg whether the user chose a channel (boolean). If
the user did not choose a channel yet, suggest the recommended channel
from channels.cfg (currently "edge").
Prepare to base postmarketOS on Alpine stable by parsing the new
channels.cfg file in pmaports.git, that describes which channel
needs which branches and mirror dirs from postmarketOS and Alpine.
Use the information in pmb.helpers.git.get_branches_official() first,
more is coming in follow-up commits.
Read the file from origin/master, so we get the latest fetched version
even if the last checked out master branch is not up-to-date (think of
currently checked out release branch instead of master, master will
never be updated to point to latest origin/master). Allow to override
the file with a new --config-channels parameter.
Related: https://postmarketos.org/channels.cfg
Let apkbuild-lint check options again, and pass the pmbootstrap specific
options with the new CUSTOM_VALID_OPTIONS variable. Add a test case and
adjust pmb.helpers.lint.check to return the output of apkbuild-lint, so
we can properly test it.
Related: https://gitlab.alpinelinux.org/Leo/atools/-/merge_requests/28
Fixes: pmaports#553
The `mesa-dri-swrast` package was merged into `mesa-dri-gallium` in Alpine.
(See 298e20d04f)
The old alias might be removed in the future, so change the generated APKBUILDs
to depend on `mesa-dri-gallium` instead.
Don't assume that the device selected in "pmbootstrap init" is in the
testing subdir anymore. The default device, qemu-amd64, was recently
moved to main, so this does not hold up anymore. Instead, use
pmb.helpers.pmaports.find to figure out the currect dir.
No build is necessary if pmaport can't be built for given arch.
pmbootstrap must use Alpine's binary package in that case, even if the
pmaport version is higher than Alpine's binary package version.
Fixes: #1897
The --no-depends option is supposed to stop pmbootstrap if it was
instructed to build a package, but a dependency must be built first. So
far, this only covers the case if there is no binary package for a dependency.
Make it stop if the binary package exists, but is outdated, too.
Fixes: #1895
Use the timestamp of .git/FETCH_HEAD in each git repository, to
determine if too much time has passed since the last fetch/pull.
Modify pmb.helpers.git.clone, so FETCH_HEAD is always created if it does
not exist (because "git clone" would not create it).
Related: #1829
Extend "pmbootstrap status" with checks for all git repositories,
derived from relevant checks in pmb.helpers.git.pull (using shared
code):
* on official branch
* workdir is clean
* tracking proper remote
* up to date
Related: #1829
In the future, device ports will be located in a subdirectory
below device/... (e.g. device/testing/device-...).
Replace all occurrences of device/* with a glob that checks the
subdirectories instead.
Note: To ensure that this always works properly we should also add some
checks that all devices are indeed located under one of the supported
subdirectories (i.e. testing/community/main).
Change the glob for pmaports to <aports>/**/APKBUILD.
This allows using subdirectories for organization outside of device/
as well.
In general, we should not assume that pmbootstrap considers empty
package directories (without APKBUILD in them). With upcoming changes
this is no longer the case, so lets create an empty file for them.
The QEMU device ports no longer make use of the linux-postmarketos-
stable/mainline kernels, causing the test to fail with
RuntimeError: Selected kernel (stable) is not configured for device qemu-amd64.
Please run 'pmbootstrap init' to select a valid kernel.
Let's configure the test to use the "virt" kernel.
Just counting the number of tries does not prevent the QEMU tests
from running long periods of time. In some situations, the ssh command
will keep trying to reach the destination almost indefinitely.
To make the 5 minutes timeout work correctly we need to:
- Add an appropriate ConnectTimeout to the ssh command
- Don't sleep for another second if ssh already took several seconds
- Check the elapsed time instead of setting a fixed amount of tries
mesa-dri-swrast and mesa-dri-virtio are both provided by mesa-dri-gallium
now, so this option does not have much use anymore. With both selections,
exactly the same packages are installed.
Work around old rust version in Alpine's armhf repository (builder
currently stuck?) compared to other arches. Armv7 is fine, so switch to
that and avoid this error:
error[E0514]: found crate `std` compiled by an incompatible version of rustc