* As discussed in IRC/matrix, we're removing `linux-postmarketos-lts`
for now. The kernel isn't used right now, and we save lots of
maintenance effort with not updating it every week or so.
* new config option `"kernel"` with possible values:
`"downstream", "mainline", "stable"` (downstream is always
`linux-$devicename`)
* ask for the kernel during `pmbootstrap init` if the device package
has kernel subpackages and install it in `_install.py`
* postmarketos-mkinitfs: display note instead of exit with error when
the `deviceinfo_dtb` file is missing (because we expect it to be
missing for downstream kernels)
* device-sony-amami:
* add kernel subpackages for downstream, mainline
* set `deviceinfo_dtb`
* device-qemu-amd64: add kernel subpackages for stable, lts, mainline
* test cases and test data for new functions
* test case that checks all aports for right usage of the feature:
* don't mix specifying kernels in depends *and* subpackages
* 1 kernel in depends is maximum
* kernel subpackages must have a valid name
* Test if devices packages reference at least one kernel
* Remove `_build_device_depends_note()` which informs the user that
`--ignore-depends` can be used with device packages to avoid building
the kernel. The idea was to make the transition easier after a change
we did months ago, and now the kernel doesn't always get built before
building the device package so it's not relevant anymore.
* pmb/chroot/other.py:
* Add autoinstall=True to kernel_flavors_installed(). When the flag
is set, the function makes sure that at least one kernel for the
device is installed.
* Remove kernel_flavor_autodetect() function, wherever it was used,
it has been replaced with kernel_flavors_installed()[0].
* pmb.helpers.frontend.py: remove code to install at least one kernel,
kernel_flavors_installed() takes care of that now.
* Change `pmbootstrap flasher flash_system` command to
`pmbootstrap flasher flash_rootfs`
* The old command still works, but all references have been changed to
the new command
* Remove obsolete `pmbootstrap flasher export` (that was changed to
`pmbootstrap export` a few months ago)
* Update `README.md` and ZSH auto completion
* Change the description of the generated rootfs image (not talking
about a system image anymore, mention that it has subpartitions)
* Better description of `pmbootstrap flasher flash_rootfs --partition`
When the native arch (e.g. `x86_64`) `APKINDEX` files are outdated, and
`pmbootstrap` gets instructed to build a linux package for a foreign
arch, then the `APKINDEX` cache did not get used anymore for the
current session. This means that every lookup of a package in an
`APKINDEX` caused the whole `APKINDEX` file to get parsed again instead
of using the cached version. This slowed it down so much that it felt
like `pmbootstrap` was looping forever.
How this happens in detail:
* Whenever pmbootstrap parses an `APKINDEX`, it fills up the
`args.cache["apkindex"]` dict with the parsed information and the
last modified date of the file.
* `pmbootstrap` checks the last modified date of the `APKINDEX` files
and updates them if they are older than 4 hours.
* When the bug appeared, then the cache was already filled up, then an
update happened and then `pmbootstrap` tried to read from the cache.
* So when reading from the `APKINDEX`, the cache gets ignored because
the last modified date is different.
* Up to this commit, the cache does not get deleted and filled up
again!
How to test:
Try these commands once without this commit, and then with this commit
applied:
```
$ sudo touch -m -t 201801010000 \
~/.local/var/pmbootstrap/cache_apk_x86_64/APKINDEX.*
$ pmbootstrap -v build linux-postmarketos-mainline --arch=armhf
```
Without the patch, you can see in `pmbootstrap log` that it is
resolving the dependencies properly, but very slowly. With the patch
the resolving happens almost instantly.
When parsing the depends of entries in the APKINDEX file, we ignore
all operators (<, =, >). (This is enough for our use case, was we only
do the dependency resolving to check which packages need to be built
and `apk` does the dependency resolving again before installing
anything).
We did not ignore the ~ character for fuzzy version compares, this is
fixed with this commit.
* pmbootstrap newapkbuild: Properly parse arguments
The `pmbootstrap newapkbuild` action wraps Alpine's `newapkbuild`. We
used to directly pass all arguments to `newapkbuild` without verifying
in Python whether they make sense or not. However, as `newpakbuild`
doesn't do strict sanity checks on the arguments, it is easy to end up
with unexpected behavior when using the command for the first time.
For example, `newapkbuild` allows either specifying a PKGNAME or SRCURL
as last parameter, and also allows setting a PKGNAME with the `-n`
parameter. It only makes sense to use that option when passing a
SRCURL.
With this commit, we duplicate the optins that should be passed through
to `newapkbuild` and use argparse to fully sanitize the options and
display a help page (`pmbootstrap newapkbuild -h`) that is consistent
with the other help pages.
Details:
* The `-f` (force) flag does not get passed through anymore. Instead we
use it in Python to skip asking if an existing aport should be
overwritten (the aports are outside of the chroot, so `newapkbuild`
can't handle it in a way that makes sense for pmbootstrap).
* Output of `newapkbuild` gets redirected to the log file now, as we
don't need it to display a help page.
* Don't verify the pkgver while creating the new APKBUILD. When passing
a SRCURL, the pkgver gets extracted from the end of the URL and may
not have a valid format yet (but we want the APKBUILD anyway).
* Stored options passed through in `pmb/config/__init__.py` and use it
in both `pmb/parse/arguments.py` and `pmb/helpers/frontend.py`.
* Only allow `-n` with SRCURL
* The postmarketOS aports folder gets specified with `--folder` now.
That way the generated help page is much closer to the original one
from `newapkbuild`. The default is `main`.
* Made the package type flags (CMake, autotools, ...) exclusive so only
one of them can be specified
In order to get cross-compilers, we generate a few aports (e.g.
binutils-armhf, gcc-armhf) automatically from Alpine's aports.
pmbootstrap was already able to perform a git checkout of Alpine's
aports repository. But it needed to be manually updated. Otherwise
the `pmbootstrap aportgen` command could actually downgrade the aport
instead of updating it to the current version.
After thinking about adding a dedicated pmbootstrap command for
updating git repositories, I thought it would be better to not open
that can of worms (pmbootstrap as general git wrapper? no thanks).
The solution implemented here compares the upstream aport version of
the git checkout of a certain package (e.g. gcc for gcc-armhf) with the
version in Alpine's binary package APKINDEX. When the aport version is
lower than the binary package version, it shows the user how to update
the git repository with just one command:
pmbootstrap chroot --add=git --user -- \
git -C /mnt/pmbootstrap-git/aports_upstream pull
Changes:
* `pmb.aportgen.core.get_upstream_aport()`: new function, that returns
the absolute path to the upstream aport on disk, after checking the
version of the aport against the binary package.
* Use that new function in pmb.aportgen.gcc and pmb.aportgen.binutils
* New function `pmb.helpers.repo.alpine_apkindex_path()`: updates the
APKINDEX if necessary and returns the absolute path to the APKINDEX.
This code was basically present already, but not as function, so now
we have a bit less overhead there.
* `pmbootstrap chroot`: new `--user` argument
* `pmb.parse.apkbuild`: make pkgname check optional, as it fails with
the official gcc APKBUILD before we modify it (the current APKBUILD
parser is not meant to be perfect, as this would require a full shell
parsing implementation).
* Extended `test_aportgen.py` and enabled it by default in
`testcases_fast.sh`. Previously it was disabled due to traffic
concerns (cloning the aports repo, but then again we do a full KDE
plasma mobile installation in Travis now, so that shouldn't matter
too much).
* `testcases_fast.sh`: With "test_aport_in_sync_with_git" removed
from the disabled-by-default list (left over from timestamp based
rebuilds), there were no more test cases disabled by default. I've
changed it, so now the qemu_running_processes test case is disabled,
and added an `--all` parameter to the script to disable no test
cases. Travis runs with the `--all` parameter while it's useful to
do a quick local test without `--all` in roughly 2 minutes instead of
10.
* `aports/cross/binutils-*`: Fix `_mirror` variable to point to current
default Alpine mirror (so the aportgen testcase runs through).
Since PR #1247 we are using the virtual package `.pmbootstrap` to mark
packages as not explcitly installed. In case `pmbootstrap` doesn't
finish the installation because of a bug, the `.pmbootstrap` virtual
package may not get uninstalled.
As virtual packages don't have the "timestamp" attribute set in the
package database (which indicates when the package was built), the
APKINDEX parser fails to parse them.
Changes:
* pmb.parse.apkindex.parse_next_block(): don't require the "timestamp"
attribute to be set (but the arch attribute instead, which is always
present)
* pmb.parse.apkindex.parse(): when a block does not have a `timestamp`
attribute, skip it, because it must be a virtual package.
* add test cases for both functions with a package database that
contains a virtual package.
`-m` is for deleting local compiled packages, for which there is no
aport with the same version. Prior to this change, this only worked
for packages where no aport exists, or for packages that are newer
than the aports.
That is, because we used the usual APKINDEX parsing logic, which
ignores old packages in the APKINDEX and only returns the one with the
highest version (that makes sense during dependency resolution).
Changes:
* New `pmb.parse.apkindex.parse_blocks()` function that returns a raw
list of blocks, instead of the dict with removed duplicates with
lower version you get from the usual `.parse()` function.
* Renamed each of the zap flags and their descriptions to make clear
what they are doing now.
```
short long (old) long (new)
-p --packages --pkgs-local
-m --mismatch-bins --pkgs-local-mismatch
-o, --old-bins --pkgs-online-mismatch
```
Use case: `mkbootimg` provides the `unpackbootimg` package. When
running `pmb.chroot.apk.install(args,"unpackbootimg")`, it was not
able to properly build the package.
Reproducing the error:
```
sudo rm ~/.local/var/pmbootstrap/packages/x86_64/mkbootimg*
pmbootstrap index
pmbootstrap --mirror-pmOS="" chroot --add=unpackbootimg
```
Or alternatively (simpler but less illustrative):
```
pmbootstrap build unpackbootimg --force
```
### Only download APKINDEX for relevant architectures
We're downloading the APKINDEX files for all architectures supported by
postmarketOS currently (x86, x86_64, armhf, aarch64). Most of the time,
we only need it for the native and device arch, so this PR reduces the
downloaded files to what is really necessary.
### Intuitive pmbootstrap update logic
* pmb.helpers.repo.update():
* Default is updating all arches where the APKBUILD files exist
* Add existing_only parameter
* Return True when files have been downloaded
* Properly print which arches will be updated
* Print update reason only in verbose log
* Add and improve comments
* pmb.parse.arguments(), update action:
* Add --non-existing parameter
* Default for --arch is None (instead of arch.native)
* pmb.helpers.frontend.update():
* Inform about --non-existing if no APKBUILDs have been updated
Here are the changes necessary in pmbootstrap to make proprietary
software installed onto the device (firmware and userspace drivers)
optional (#756). To full close the issue, we need to apply this concept
to all device packages we already have in a follow-up PR.
Changes:
* New config file options nonfree_firmware and nonfree_userland, which
we ask for during "pmbootstrap init" if there are non-free components
for the selected device.
* We find that out by checking the APKBUILD's subpakages: The non-free
packages are called $pkgname-nonfree-firmware and
$pkgname-nonfree-userland.
* During "pmbootstrap init" we also show the pkgdesc of these
subpackages. Parsing that is implemented in
pmb.parse._apkbuild.subpkgdesc(). It was not implemented as part of
the regular APKBUILD parsing, as this would need a change in the
output format, and it is a lot *less* code if done like in this
commit.
* pmb/parse/apkbuild.py was renamed to _apkbuild.py, and
pmb/install/install.py to _install.py: needed to call the function in
the usual way (e.g. pmb.parse.apkbuild()) but still being able to
test the individual functions from these files in the test suite.
We did the same thing for pmb/build/_package.py already.
* Install: New function get_nonfree_packages() returns the non-free
packages that will be installed, based on the user's choice in
"pmbootstrap init" and on the subpackages the device has.
* Added test cases and test data (APKBUILDs) for all new code,
refactored test/test_questions.py to have multiple functions for
testing the various questions / question types from
"pmbootstrap init" instead of having it all in one big function.
This allows to use another aport folder for testing the new
non-free related questions in init.
The message appears 20 or so times in a row when setting up a new
chroot. Right now we log it into the debug log (which is what
"pmbootstrap log" and "pmbootstrap --details-to-stdout" show). This
is annoying for normal pmbootstrap usage, and really clutters up the
Travis output.
This commit changes the log level to verbose, so it only shows up
when "-v" is passed to pmbootstrap.
* The APKINDEX parser used to return a dictionary with one package for
a given package name. This works for the installed packages database,
because there can only be one provider for a package. But when
parsing packages from binary repositories, we need to support
multiple providers for one package. It is now possible to get a
dictionary with either multiple providers, or just a single provider
for each package.
* Dependency parsing logic has been adjusted, to support multiple
providers. For multiple providers, the one with the same package
name as the package we are looking up is prefered. If there is none
(eg. "so:libEGL.so.1" is provided by "mesa-egl"), it prefers packages
that will be installed anyway, and after that packages that are
already installed. When all else fails, it just picks the first one
and prints a note in the "pmbootstrap log".
* Added testcases for all functions in pmb.parse.apkindex and
pmb.parse.depends
* pmbootstrap chroot has a new "--add" parameter to specify packages
that pmbootstrap should build if neccessary, and install in the
chroot. This can be used to quickly test the depencency resolution
of pmbootstrap without doing a full "pmbootstrap install".
Fixes#1122.
* New "pmbootstrap build --src=/local/source/path hello-world" syntax
* The local source path gets mounted inside the chroot
* From there, a copy of the source code gets created with rsync (so
we can write into the source folder if necessary, for better
compatibility with all kinds of APKBUILDs)
* After the aport gets copied into the chroot before building (as
usually), we extend the APKBUILD with overrides to make it use
mountpoint's source instead of downloading the package's source
from the web as usually
* The package built with the local source gets _pYYYYMMDDHHMMSS
appended to the pkgver
* linux-postmarketos-mainline: use $builddir, fix patch checksum
The 'necessary_kconfig_options' dictionary in pmb/config/__init__.py
now has the different architectures (space separated) as the keys and
the dictionary, which matches kernel config options and their
expected value, as its value.
For that purpose, the 'check' function in pmb/parse/kconfig.py was
modified, so that it takes the architecture from the kconfig filename
and uses it to find the needed kernel config options.
Closes#1218.
Closes#441. Adjust bootimg_analyze code:
* Install mkbootimg (which now provides unpackbootimg) instead of
unpackbootimg. In theory, pmbootstrap should recognize this
automatically, however right now it does not yet handle this case.
* The file names of the extracted files have changed.
Follow up to #1162.
* `pmb.build.buildinfo()`: Used to record the build environment. It is
flawed because it scans the repo APKINDEX files instead of using the
actually installed packages list. When it was implemented we were not
able to do the latter. After this is removed, `pmb.parse.depends` can
be simplified (it needs to be rewritten for #1122).
* `pmb.helpers.repo.diff()` and `pmb.helpers.repo.files()`: These were
used exclusively by `pmb.build.buildinfo()`, to learn about which
files have been changed in the local repository folder after a
package was built. The idea was, that we could find subpackages that
way. But this information is present in the installed package list as
well, which is a much cleaner approach.
zap -m:
* APKINDEX parsing: parse the "origin" field as well, so we know
where a subpackage comes from
* pmbootstrap zap -m: properly delete all packages, that do not
have an aport or where the aport has another version. This also
works with subpackages now,
we use the origin field to resolve it.
* Only reindex when packages have been deleted in "zap -m"
zap in general:
* Show the amount of cleared up space after the deletion instead
of "Done"
* Print "Shutdown complete" to "pmbootstrap log" instead of stdout
(we need to call it twice during zap now to get the space
calculation right)
* Add `--dry` argument to `pmbootstrap zap` (this was very useful
for debugging) to list the packages/chroots that would get
deleted
* Roughly output the command that would get executed to delete
files, so it's obvious what's going on in --dry mode. (% rm ...)
If you want to build a package without changing the version number,
please use `--force` from now on. For example:
pmbootstrap build --force hello-world
Prior to this commit, changes were detected automatically (timestamp
based rebuilds). However, that feature does not work as expected with
the binary package repository we have now, and depending on how you use
git, it has never worked. Close#1167, close#1156, close#1023 and
close#985. This commit also mentions --force when a package is up to date,
but the user requested to build it.
Preparation for #1122.
* `pmb.parse.apkindex.parse()`, removed strict parameter: This used to raise
an exception when two entries in the apkindex provided the same package.
Turns out this is *not* invalid after all, two packages can provide the same
soname for example (e.g. libhybris, mesa-egl). In an APKINDEX, sonames are
listed as they were packages ("so:libjpeg.so.8" etc.).
* Remove `pmbootstrap challenge` leftover code from reproducible builds effort,
which was a dead end. This code uses the broken strict feature.
This PR makes the workflow faster and pmbootstrap will
produce less traffic. Details:
* Check if it's possible to create and read from a device
node directly when initializing a chroot (closes#472)
* Copy the Qemu binary into the forign-arch chroots
before initializing them, so the post-install script
directly work during the chroot setup and we don't need
to call apk fix afterwards
* Use pmb.helpers.repo.update(), which only updates the
APKINDEX files if they are older than 4 hours, instead
of using apk's repo update function which always
downloads the APKINDEX files
* Chroot initialization
* Getting the initial APKINDEX to download apk-tools-static
* Updating the APKINDEX at the start of pmbootstrap install
* Fixed a bug in from_chroot_suffix: the buildroot_x86_64 has
architecture x86_64, not x86.
Small improvements:
* Allow to specify multiple packages to `pmbootstrap parse_apkbuild`
* Specifying no package will parse all packages (like kconfig_check)
(also `parse_apkbuild`)
* JSON output is sorted of `parse_apkbuild`
* Make pkgver check optional, so we can disable it in the device wizard test case
* Parse_apk* -> apk*_parse
* Don't let the user mess with globs (disallow '*' in pkgname)
Fixes#893. Changes:
* New action: "pmbootstrap pkgrel_bump"
* pmbootstrap detects missing soname depends when trying to install
anyting, and suggests "pkgrel_bump --auto" to fix it
* Testcase test_soname_bump.py checks the pmOS binary package repo
for soname breakage, so we see it when CI runs for new PRs
* libsamsung-ipc: bump pkgrel because of soname bump
* Don't ask for the mesa driver when the Qemu arch is not the
native arch and always use swrast in that case
* qemu-vexpress: use LTS kernel
* qemu-aarch64: use drm-backend for weston
* Changed usb-shell behavior, it wait for some user action before continue booting
* Rename usb-shell to debug-shell and changed port to 23
* Add `20-debug-shell.sh` script to static code analysis
* Enable eth0 interface in initramfs (qemu)
* Add additional script to run a shell in order to be able to kill it from a telnet session
* Rename deviceinfo variable flash_methods to flash_method
* Update pmb.config.deviceinfo_attributes / add sanity check
* Add test case that parses all deviceinfo files
* ccache: Fix for distcc cross-compiling / various improvements
* Make ccache work when cross-compiling with distcc (fix#716)
* Allow to configure the ccache size in "pmbootstrap init"
* Moved ccache stats code from pmb/build/other.py to
pmb/helpers/frontend.py
* Grouped job count, ccache size and timestamp based rebuilds
together to "build options" and allow to skip them
* Sorted config options that had to be modified anyway
alphabetically
* Improve comment in arch-bin-masquerade APKBUILD
Fixes#955. Previously we did not look through all APKINDEXes while
looking for the package with a given name and the highest version.
This caused pmbootstrap to build packages even if they are in the
binary repo and up to date.
This is a follow-up to #935.
* fix regression #941: pmbootstrap doesn't automatically pick the
right architecture for building when none is specified
* remove obsolete --noarch-arch parameter
* Rename pmb/build/package.py to pmb/build/_package.py, so we can
access the functions it contains in testcases, and still use
pmb.build.package()
* Refactor the entire file. Instead of one big function that does
too many things, we have many small ones now, that are tested
in the testsuite and easier to modify
* Whenever building a package, pmbootstrap does not only build and
install the "makedepends" (like we did before), now it does the
same for the "depends". That's required to be compatible with
abuild. The old behavior can still be used with 'pmbootstrap
build --ignore-depends'.
* Because of that change, noarch packages can no longer be built in
the native chroot if we need them for a foreign chroot. A device-
package depending on a kernel would pull in the same kernel for
the native architecture otherwise.
* Running 'pmbootstrap build device-...' without '--ignore-depends'
and without a matching '--arch' displays a note that explains
this change to the user and tells how to use it instead.
* Noarch packages no longer get symlinked. That was only
implemented for packages built in the native chroot, and now that
is not always the case anymore. Symlinking these packages creates
packages with broken dependencies anyway (e.g.
device-samsung-i9100 can't be installed in x86_64, because
linux-samsung-i9100 is armhf only).
* Rename "carch" to "arch" wherever used. Naming it "carch"
sometimes is confusing with no benefit.
* Add a testcase for the aarch64 qemu workaround (because it failed
first and I needed to know for sure if it is working again).
* Improved some verbose logging, which helped with development of
this feature.
* Removed the old "build" test case (which was disabled in
testcases_fast.sh) as the new "build_package" test case covers its
functionallity.
* Only build indexes if the packages folder exists for that arch (Travis
couldn't run a test case otherwise)
* add my own build key
* enable the repo in the config
* update the README file
* Adjust testcase, that validates the keys and enable it in testcases_fast.sh
* Only save/load keys to/from the config file, which we ask for during
'pmbootstrap init', so the binary repo gets used even if a config file
already exists (this also removes a workaround, that deletes the work
folder path from the config dictionary before writing it)
* Download missing APKINDEX.tar.gz files with Python code, before
attempting to build packages (so we know which ones aleady exist in
the binary packages repository)
* Consider APKINDEX files older than 4 hours as outdated and download
them again (also in Python code)
* Provide 'pmbootstrap update' to force-update the APKINDEX files
* Travis: more logging output on failure
* Only allow keys from config_keys to be used by "pmbootstrap config"
The mesa driver, which ends up in the installation image, needs to be known
before the installation is done (in other words: when running the qemu action,
it is to late as the image has already been generated). That's why one can
choose the Qemu mesa driver in `pmbootstrap init` now:
```
Device [qemu-amd64]:
Which mesa driver do you prefer for your Qemu device? Only select something other
than the default if you are having graphical problems (such as glitches).
Mesa driver (dri-swrast/dri-virtio) [dri-virtio]:
```
It is still possible to select `dri-swrast`, because `dri-virtio` may not work
in all cases, and that way we could easily debug it or experiment with other
mesa drivers (e.g. the "vmware" one, which is supported by mesa and Qemu).
Other changes:
* `pmbootstrap qemu` accepts a `--display` variable now, which passes the value
directly to `qemu`'s `display` option. It defaults to `sdl,gl=on` (@PureTryOut
reported that to work best with plasma mobile on his PC). `--display` and
`--spice` (which is still working) are mutually exclusive.
* Removed obsolete telnet port pass-through: We only use the debug telnet port
since osk-sdl has been merged.
* Add show-cursor to the Qemu command line, so it shows a cursor in X11
* Refactored the spice code (`command_spice` only returns the spice command,
because it has all necessary information already) and the spice port can be
specified on the commandline now (previously it was hardcoded in one place and
then always looked up from there).
* Start comments with capital letters.
* Keep the log on the screen a bit shorter (e.g. Qemu command is written to the
"pmbootstrap log" anyway, so there's no need to display it again).
* linux-postmarketos-stable: Adjust kernel configs
x86_64, armhf: enable as modules:
CONFIG_DRM_VIRTIO_GPU, CONFIG_VIRTIO_PCI, CONFIG_VIRTIO_BALLOON
aarch64: all 3 options were already enabled as built-in (no change)
* Set '-vga virtio' for mesa-dri-virtio
* Add architecture argument for the buildroot chroot, defaults to device architecture
* Output pmbootstrap log file after failure to debug Travis failure
* Travis: disable timestamp based rebuilds
* apkindex:
* Also parse the architecture field
* symlink_noarch_package:
* Renamed to symlink_noarch_packages
* Always work on all packages (so we don't need to guess which
subpackages have been generated after a certain build)
* Get invoked when running 'pmbootstrap index'
* Use 'apk index' to generate one index, where the architecture
does not get rewritten (abuild does that by default, due to
Alpine's repos not having a 'noarch' folder and diverging from
that doesn't make things easier for us). That goes super fast,
and then we know which packages are noarch packages and can
create the symlinks.
* Made output less verbose:
* Use -q for 'apk index' when calling it directly (when it gets
called by abuild we can't control that)
* Output that the APKINDEXes get reindexed only to the 'pmbootstrap
log'.
Oliver Smith
Daniele Debernardi
Luca Weiss
Alexander
Lucas Ramage
Pavel Machek
Attila Szöllősi
Pablo Castellano
clayton craft