Closes#441. Adjust bootimg_analyze code:
* Install mkbootimg (which now provides unpackbootimg) instead of
unpackbootimg. In theory, pmbootstrap should recognize this
automatically, however right now it does not yet handle this case.
* The file names of the extracted files have changed.
Right now, they appear on screen when using --details-to-stdout. This
does not work well with Travis CI and screws up the log.
Disabling the progress bars in abuild works just like Alpine does it in
their Travis CI script: Exporting SUDO_APK as
"abuild-apk --no-progress" instead of "abuild-apk".
test_check_checksums.py: Run "pmbootstrap build_init" before building
any packages, so it is a bit less verbose (downloading the APKINDEX
files etc.). Later we run the build init code again (because we use
--strict while building the packages), but then the APKINDEX files
are already present. So overall the log is a bit shorter before the
building starts. (It is still logged to the logfile, which gets
printed on error anyway.)
* Testsuite: Run UIs in Qemu and check running processes (and other changes)
* When `pmbootstrap qemu` gets killed, it now takes down the Qemu process with it
* `test/check_checksums.py` got a new optional `--build` parameter, which makes
it build all changed packages instead of just checking the checksums
* We run this before running the testsuite now, so all changed packages get
built before running tests (otherwise tests would hang without any output
while a changed package is building)
* New testcase, that zaps all chroots, installs a specific UI (xfce4 and
plasma-mobile currently, easy to extend), runs it via Qemu and checks the
running processes via SSH.
* Version checking testcase: rewritten to include Alpine's testsuite file in
our source tree, so we don't need to clone their git repo anymore. Now it
is enabled for Travis.
* All this gives us a nice 10% code coverage boost
* Increased the `hello-world` pkgrel to verify that the Travis job is working.
* Various fixes
* Build device-packages for the device arch and don't raise an
exception, but print a note if --ignore-depends is not specified
and therefore the kernel gets installed, too.
* Don't use --force when building in Travis (because abuild doesn't
check the checksums then. Bug report on the way.)
* Don't run the building process in the background, but wait for its
completion
* Exit with 1 when showing usage in check_checksums.py
It used to have an entry for /mnt/pmbootstrap-packages, which only
makes sense while working on the chroot with pmbootstrap. After the
installation on the device, there's no repo in that path.
Furthermore, empty lines were added to the recovery installer script
for readability (thanks @ata2001!)
Follow up to #1162.
* `pmb.build.buildinfo()`: Used to record the build environment. It is
flawed because it scans the repo APKINDEX files instead of using the
actually installed packages list. When it was implemented we were not
able to do the latter. After this is removed, `pmb.parse.depends` can
be simplified (it needs to be rewritten for #1122).
* `pmb.helpers.repo.diff()` and `pmb.helpers.repo.files()`: These were
used exclusively by `pmb.build.buildinfo()`, to learn about which
files have been changed in the local repository folder after a
package was built. The idea was, that we could find subpackages that
way. But this information is present in the installed package list as
well, which is a much cleaner approach.
Nowadays pmb.config.build_device_architectures holds the native
architecture as well, so we don't need to explicitly download the
native architecture APKINDEX.
* Fail if mkbootimg/uboot-tools are not installed, but creating a
boot.img file / u-boot legacy image was requested via deviceinfo
(fixes#312)
* Fail if /boot/dt.img is missing, but we have a qcdt device
* Fail if the dtb file specified in deviceinfo does not exist
* Fail if mkbootimg etc. exit with error code
* Don't try to add the ext4 module into the initramfs. We always
compile it into the kernel. Instead, kconfig_check makes sure it
is enabled now. (fixes#1037)
* Add a note that modprobe warnings can be ignored mostly
zap -m:
* APKINDEX parsing: parse the "origin" field as well, so we know
where a subpackage comes from
* pmbootstrap zap -m: properly delete all packages, that do not
have an aport or where the aport has another version. This also
works with subpackages now,
we use the origin field to resolve it.
* Only reindex when packages have been deleted in "zap -m"
zap in general:
* Show the amount of cleared up space after the deletion instead
of "Done"
* Print "Shutdown complete" to "pmbootstrap log" instead of stdout
(we need to call it twice during zap now to get the space
calculation right)
* Add `--dry` argument to `pmbootstrap zap` (this was very useful
for debugging) to list the packages/chroots that would get
deleted
* Roughly output the command that would get executed to delete
files, so it's obvious what's going on in --dry mode. (% rm ...)
If you want to build a package without changing the version number,
please use `--force` from now on. For example:
pmbootstrap build --force hello-world
Prior to this commit, changes were detected automatically (timestamp
based rebuilds). However, that feature does not work as expected with
the binary package repository we have now, and depending on how you use
git, it has never worked. Close#1167, close#1156, close#1023 and
close#985. This commit also mentions --force when a package is up to date,
but the user requested to build it.
Preparation for #1122.
* `pmb.parse.apkindex.parse()`, removed strict parameter: This used to raise
an exception when two entries in the apkindex provided the same package.
Turns out this is *not* invalid after all, two packages can provide the same
soname for example (e.g. libhybris, mesa-egl). In an APKINDEX, sonames are
listed as they were packages ("so:libjpeg.so.8" etc.).
* Remove `pmbootstrap challenge` leftover code from reproducible builds effort,
which was a dead end. This code uses the broken strict feature.
The message showed up, when you apk-static download could not be
verified. What the user needs to do instead is checking if openssl
is installed, and possibly delete the http cache ("zap -hc").
This PR makes the workflow faster and pmbootstrap will
produce less traffic. Details:
* Check if it's possible to create and read from a device
node directly when initializing a chroot (closes#472)
* Copy the Qemu binary into the forign-arch chroots
before initializing them, so the post-install script
directly work during the chroot setup and we don't need
to call apk fix afterwards
* Use pmb.helpers.repo.update(), which only updates the
APKINDEX files if they are older than 4 hours, instead
of using apk's repo update function which always
downloads the APKINDEX files
* Chroot initialization
* Getting the initial APKINDEX to download apk-tools-static
* Updating the APKINDEX at the start of pmbootstrap install
* Fixed a bug in from_chroot_suffix: the buildroot_x86_64 has
architecture x86_64, not x86.
Example: Building gcc-armhf for armhf does not make sense, so this
commit changes arch="all" to arch="aarch64 x86_64". This helps to
simplify the repository scripts (#970).
Also don't build "-repack" packages in native chroot anymore.
This was a legacy hack, which has no use anymore, and it prevented
the package from being built for different architectures.
Small improvements:
* Allow to specify multiple packages to `pmbootstrap parse_apkbuild`
* Specifying no package will parse all packages (like kconfig_check)
(also `parse_apkbuild`)
* JSON output is sorted of `parse_apkbuild`
* Make pkgver check optional, so we can disable it in the device wizard test case
* Parse_apk* -> apk*_parse
* Don't let the user mess with globs (disallow '*' in pkgname)
* pmbootstrap: __config_.py - update the deviceinfo_attributes table
Add missing attributes:
* "screen_width"
* "screen_height"
* "dev_touchscreen"
* "dev_touchscreen_calibration"
* "dev_keyboard"
* "bootimg_qcdt"
Reorder the list to correspond to pmb/aportgen/device.py
Add a comment in the aforementioned file to avoid forgetting to update
this list.
Signed-off-by: Mayeul Cantan <mayeul.cantan@gmail.com>
* pmbootstrap: add qcdt generation to the linux aportgen APKBUILDs
This checks the next box in #688
When the device has bootimg_qcdt set to true, the following is done to
the linux APKBUILD:
* Add dtbtool to makedepends
* Call dtbTool during build() to generate dt.img
* Add the generated dt.img in the package's boot/dt.img
Signed-off-by: Mayeul Cantan <mayeul.cantan@gmail.com>
Fixes#893. Changes:
* New action: "pmbootstrap pkgrel_bump"
* pmbootstrap detects missing soname depends when trying to install
anyting, and suggests "pkgrel_bump --auto" to fix it
* Testcase test_soname_bump.py checks the pmOS binary package repo
for soname breakage, so we see it when CI runs for new PRs
* libsamsung-ipc: bump pkgrel because of soname bump
* Don't ask for the mesa driver when the Qemu arch is not the
native arch and always use swrast in that case
* qemu-vexpress: use LTS kernel
* qemu-aarch64: use drm-backend for weston
This reverts commit 99d7b58ee5.
People usually add manufacturer name in the phone full name which
results in having manufacturer written double in pkdesc (e.g. `Samsung
Samsung Galaxy Mini 2`)
If pmbootstrap says your apk is outdated, just run...
pmbootstrap zap -hc
...as it advises, to clear your http cache which contains the old
apk-tools-static.
This fixes#1066, where pmbootstrap crashes with a permission error
when you run it for the first time (no work folder exists) and you
run the boot.img analyzer because you want to start a new device
port.
It also prints a more helpful message if pmbootstrap crashes before
the log file was generated (suggests to use --details-to-stdout).
* Changed usb-shell behavior, it wait for some user action before continue booting
* Rename usb-shell to debug-shell and changed port to 23
* Add `20-debug-shell.sh` script to static code analysis
* Enable eth0 interface in initramfs (qemu)
* Add additional script to run a shell in order to be able to kill it from a telnet session
* Rename deviceinfo variable flash_methods to flash_method
* Update pmb.config.deviceinfo_attributes / add sanity check
* Add test case that parses all deviceinfo files
* ccache: Fix for distcc cross-compiling / various improvements
* Make ccache work when cross-compiling with distcc (fix#716)
* Allow to configure the ccache size in "pmbootstrap init"
* Moved ccache stats code from pmb/build/other.py to
pmb/helpers/frontend.py
* Grouped job count, ccache size and timestamp based rebuilds
together to "build options" and allow to skip them
* Sorted config options that had to be modified anyway
alphabetically
* Improve comment in arch-bin-masquerade APKBUILD
Fixes#955. Previously we did not look through all APKINDEXes while
looking for the package with a given name and the highest version.
This caused pmbootstrap to build packages even if they are in the
binary repo and up to date.