Made changes to limit the line length in following files,
- pmb/parse/_apkbuild.py
- pmb/parse/apkindex.py
- pmb/parse/binfmt_info.py
- pmb/parse/deviceinfo.py
- test/test_parse_apkbuild.py
Added the above files in E501 flake8 command list.
Substitute f-string for string concatenation.
The sideload command runs the supplied names through the pmbootstrap
buildsystem to make sure they're up-to-date, then uses scp from the host
to copy the built apks to /tmp on the phone and installs them through
ssh.
If the --install-key option is set then it will also copy over the apk
key that's used for signing the packages built by pmbootstrap in case
the postmarketOS install on the device isn't build by the same machine
as you're sideloading from.
Move the numerous "install" arguments into an own function (as it was
done with actions added later). Categorize the options and update the
help output, so the options are easier to understand.
This adds a new commandline flag -E / --extra-space for
specifying the amount of additional space to be added to
the image size to work around cases where the automatically
determined size turns out to not actually be enough.
The value is also asked for in the "Additional options"
section of the interactive mode.
Fixes: #1904
Alpine indicates with arch="", that a package should temporarily not be
built for any architecture. Support this in postmarketOS too by not
complaining in the APKBUILD parser if arch is empty.
Adjust pmb.build.autodetect.arch and pmb.build.menuconfig.get_arch, so
both don't fail with an IndexError when encountering a disabled package.
Co-Authored-By: Luca Weiss <luca@z3ntu.xyz>
This adds support for specifying an arbitrary git ref (e.g. commits,
tags, branches) to upgrade to. This can be useful if a specific commit
needs to be packaged instead of the latest available. Alternatively you
can also specify a branch to be used if the default branch is 'stable'
but 'develop' should be packaged.
This also removes old code to use the 'bionic' branch for UBports Lomiri
(formerly Unity 8) packages.
Some Mediatek devices have a special 512-byte header around the zImage
which must be generated so the device boots.
Support for that exists for a while in postmarketOS but detection was
missing. Add that.
Let UI meta-packages specify apps in "pmb_recommends" to be explicitly
installed by default, and not implicitly as dependency of the UI
meta-package ("depends"). Therefore make these apps uninstallable,
without removing the meta-package.
Add pmbootstrap install --no-recommends to disable this feature.
Add initial support for the on-device installer in pmbootstrap. Let
pmbootstrap create a regular split image, then prepare a new installer
rootfs and copy the previously generated rootfs image into the installer
rootfs. Put the installer rootfs into a new image, with reserved space.
There is more to do from here, such as disabling the generation of the
user account when using --ondev. But this requires support in
postmarketos-ondev first, so let's build that iteratively.
Related: https://wiki.postmarketos.org/wiki/On-device_installer
Related: https://gitlab.com/postmarketOS/postmarketos-ondev/-/issues
Alpine APKBUILDs have the concept of "provider priorities" that affect
the choice of the provider to install when multiple packages provide
a virtual package.
One use case for this is to allow installation of different firmware
versions. bq-paella can run unsigned firmware, therefore you have the
choice between using the original firmware from the manufacturer, or
a slightly newer version from Qualcomm for the Dragonboard 410c.
We add provides="firmware-qcom-msm8916-wcnss" (the "virtual package")
to both firmware-qcom-db410c-wcnss and firmware-bq-picmt-wcnss.
At this point, attempting to install "firmware-qcom-msm8916-wcnss"
would still fail with apk. (Because it does not know which provider
to install.)
To pick a default we can set e.g. provider_priority=100 for
firmware-qcom-db410c-wcnss (the slightly newer version).
In that case, firmware-qcom-db410c-wcnss should be installed by default.
However, the user can choose to do "apk add firmware-bq-picmt-wcnss"
to override the default choice in case of problems. In that case,
the conflicting firmware-qcom-db410c-wcnss will be automatically removed.
At the moment, pmbootstrap does not respect the "provider_priority" at all.
In the above case, it would always install "firmware-bq-picmt-wcnss"
during "pmbootstrap install" since that has the shortest name.
Extend the pmbootstrap code to pick a provider with the highest priority
(if any of the providers has a priority set).
Use mirrordir_pmos and mirrordir_alpine from channels.cfg to generate
the mirror URLs for postmarketOS and Alpine, which get written to
/etc/apk/repositories and which postmarketOS uses to download the
APKINDEX files.
Remove hardcoded "master" at the end of the postmarketOS mirror and use
mirrordir_pmos instead (which is "master" for the edge channel). Let the
postmarketOS mirror end in a '/' for consistency with the Alpine mirror
in pmb/config/__init__.py.
Remove obsolete --alpine-version. To experiment with a different Alpine
version, one should pass a custom --config-channels from now on.
Prepare to base postmarketOS on Alpine stable by parsing the new
channels.cfg file in pmaports.git, that describes which channel
needs which branches and mirror dirs from postmarketOS and Alpine.
Use the information in pmb.helpers.git.get_branches_official() first,
more is coming in follow-up commits.
Read the file from origin/master, so we get the latest fetched version
even if the last checked out master branch is not up-to-date (think of
currently checked out release branch instead of master, master will
never be updated to point to latest origin/master). Allow to override
the file with a new --config-channels parameter.
Related: https://postmarketos.org/channels.cfg
Use pmb.helpers.args.add_cache() with the args used during
autocompletion, so pmb.helpers.pmaports._find_apkbuilds() does not fail
when trying to access args.cache.
Flashes device vbmeta partition (can be overriden with
"flash_fastboot_partition_vbmeta" setting in deviceinfo)
with custom vbmeta.img which has verity flag disabled,
so device can boot postmarketOS with no problems.
In the future, device ports will be located in a subdirectory
below device/... (e.g. device/testing/device-...).
Replace all occurrences of device/* with a glob that checks the
subdirectories instead.
Note: To ensure that this always works properly we should also add some
checks that all devices are indeed located under one of the supported
subdirectories (i.e. testing/community/main).
Change the glob for pmaports to <aports>/**/APKBUILD.
This allows using subdirectories for organization outside of device/
as well.
For KVM the code is run pretty much natively on the host CPU, so all
CPU extensions available on the host CPU can be also used inside the VM.
To expose that information to the VM we should pass "-cpu host", so the
VM is aware of which CPU is in use.
For CPU emulation, QEMU uses a rather minimal CPU on x86_64 by default.
It does not have support for SSE3/4 etc, which may be required for some
applications to work properly (e.g. Android in Anbox). Add a --cpu flag
to make the emulated CPU configurable. Useful values are for example
--cpu max to emulate all implemented CPU features.
To test QEMU's CPU emulation it is useful to have a switch to disable
KVM, even when it is available (and potentially working fine).
Add --no-kvm for that purpose.
For some reason, the SDL display backend changes the video resolution
to 1024x768, while the GTK display keeps it at 640x480.
This is annoying, because at the moment we can only set one display
resolution for a device in postmarketOS (e.g. for the splash screen).
At the moment, the resolution for the splash screen is set to 640x480,
which therefore shows up too small with the default SDL display.
It seems like the display resolution can be only changed in the guest
directly. Linux has a video= kernel parameter that can be used to
implement this. (See: https://www.kernel.org/doc/html/latest/fb/modedb.html)
Let's set 1024x768 by default, but make it configurable through --video.
The QEMU 'tablet' input device reports absolute positions instead
of relative mouse pointer movements. This can be used to automatically
grab/release the mouse pointer when entering/leaving the QEMU window,
instead of having to release it with CTRL + ALT + G manually.
This is quite convenient and should be the default option normally,
but at least on my PC the mouse pointer is reported with some vertical
offset for some reason (you can't reach the top and it extends below
the QEMU window...). Let's add it as an optional --tablet option for now.
When using pmbootstrap, you usually select the device you want to work
on using 'pmbootstrap init', generate the rootfs and can then run more
commands in the context of the device.
The same needs to be done before using QEMU (to generate the rootfs).
But for some reason 'pmbootstrap qemu' requires setting the --arch
parameter when running QEMU for a foreign architecture, even when the
device is still selected in pmbootstrap.
Even more confusing is that setting "--arch arm" always selects
device-qemu-vexpress, but this is not immediately clear from the name.
Let's make this a lot more intuitive by making sure there is a QEMU
device selected when running 'pmbootstrap qemu'. We can then use the
device information to infer the architecture automatically.
At the moment, the --display argument is a bit complicated to use.
A common use would be to switch between the UIs (sdl, gtk, none)
or to enable the software rasterizer. Split the two use cases
to separate arguments to make it more intuitive.
mesa-dri-swrast and mesa-dri-virtio are both provided by mesa-dri-gallium
now, so this option does not have much use anymore. With both selections,
exactly the same packages are installed.
The SPICE UI option tends to be broken (see #1836), and even when it is
working, it is not working particularly well. QXL requires special handling
in our QEMU packages, when now virtio-gpu (virgl) is working quite well overall.
Apparently it is possible to use virgl with SPICE; but only when using
a Unix socket instead of a TCP port. That again is a bit complicated
because we run QEMU outside the chroot and the SPICE client within.
Overall it does no longer seem to be worth the effort.
The default QEMU UI is working just fine (for the purposes of testing
postmarketOS at least).
Shubham Naik
Oliver Smith
Martijn Braam
HenriDellal
Johannes Marbach
timbz
yarl
Luca Weiss
Mark Hargreaves
Minecrell
Anjandev Momi
Antoine Fontaine
Daniele Debernardi
Niklas Cathor
Alexey Min