The sdcard option can not only be used to write to SD cards, but also
for writing to USB sticks. Or even to write to internal storage if
pmbootstrap runs on a system booted from a live disk / seconds storage.
Drop the check. Thanks to Raymond Hackley for pointing out that this
check is not useful.
Reviewed-by: Anton Bambura <jenneron@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20231101193702.2223-1-ollieparanoid@postmarketos.org%3E
This fixes an issue when pmb is run on an Alpine/pmOS host and apk.static sees
that /etc/apk/interactive is set on the host. It's really annoying to have the
build pause so apk can prompt when building chroots, so this uses a flag to apk
to disable interactive mode. I can't think of any situations where we would
actually want to prompt users when building chroots, by then all user
configuration should have been completed via pmb init/config.
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Co-developed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20231110185320.8358-1-clayton@craftyguy.net%3E
Currently, pmbootstrap checks if either the kernel or the ramdisk in a boot.img
contains the MediaTek header, and if one does, it assumes both do. It hardcodes
the label KERNEL for the kernel and ROOTFS for the ramdisk.
My Amazon Echo Dot (gen 2) has a boot.img where only the kernel has the header,
but not the ramdisk. These changes (as well as those in my new boot-deploy MR)
account for that situation (and any possible label an image has) by splitting
bootimg_mtk_mkimage into two variables for the kernel and the ramdisk labels.
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/patches/46351
It can be quite useful to check the configs for a list of packages, so
adjust the argument parsing code to support that.
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Tested-by: Oliver Smith <ollieparanoid@postmarketos.org>
Reviewed-by: Clayton Craft <clayton@craftyguy.net>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20231028085901.35205-1-luca@z3ntu.xyz%3E
This is required for being able to boot compressed kernels via EFI stub
on aarch64.
As far as I can tell, EFI_ZBOOT was added in a050910972bb2, and
available in 6.1.0 or later. I'm not sure if it was backported to other
older LTS versions or not...
Reviewed-by: Anton Bambura <jenneron@postmarketos.org>
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Tested-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20231011212433.17131-1-clayton@craftyguy.net%3E
Cache the compiler output of rust code with sccache, like we use ccache
for c code.
I've considered using sccache to completely replace ccache since it can
cache output of C/C++ code too. But let's not do it for now since ccache
doesn't need to run a daemon in the background that needs to be stopped
when shutting down / zapping. Also it would need more refactoring.
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230806184729.4891-5-ollieparanoid@postmarketos.org%3E
Shorten this message:
> NOTE: 6 user interfaces are not available. If device supports GPU
> acceleration, set "deviceinfo_gpu_accelerated" to make UIs available.
> See: <https://wiki.postmarketos.org/wiki/Deviceinfo_reference
to:
> NOTE: 6 UIs are hidden because "deviceinfo_gpu_accelerated" is not set
> (see https://postmarketos.org/deviceinfo).
This also fixes the non-closed angle bracket by simply removing it. I
used to put angle brackets around all URLs printed in pmbootstrap
initially, but have been moving away from that when touching related
code as it doesn't add anything useful.
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Clayton Craft <clayton@craftyguy.net>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230802172542.4861-3-ollieparanoid@postmarketos.org%3E
Change the defaults in the new device port wizard:
* arch: armv7 -> aarch64
New devices are more likely to be aarch64.
* flash method: 0xffff -> none
The only device that uses 0xffff is the N900, it's extremely unlikely
that it will get used for a new port. Use the neutral "none" instead.
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Clayton Craft <clayton@craftyguy.net>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230802172542.4861-2-ollieparanoid@postmarketos.org%3E
Fix that the list "cmd" was turned into a string if one of the proxy
vars was set in the environment. Add a test for this code path. Before
this patch:
$ FTP_PROXY=test pmbootstrap -v --details-to-stdout status
…
% cd /home/user/.local/var/pmbootstrap/cache_git/pmaports; git remote -v
run: FTP_PROXY=test ['git', 'remote', '-v']
ERROR: [Errno 2] No such file or directory: "FTP_PROXY=test ['git', 'remote', '-v']"
Fixes: 1a00c04f ("pmb.helpers.run_core: always configure proxy vars if set in environment")
Reviewed-by: Clayton Craft <clayton@craftyguy.net>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230713182337.6185-3-ollieparanoid@postmarketos.org%3E
Since we're using mtkclient a lot anyways, it makes sense to add
support for it to pmbootstrap.
This was originally implemented by JustSoup321, but they had issues
submitting the patch, so I've cleaned it up for upstream submission.
Co-Authored-By: JustSoup321 <brandonboese@protonmail.com>
Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
Signed-off-by: hexaheximal <hexaheximal@proton.me>
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230712231807.22590-1-hexaheximal@proton.me%3E
The changes in pmaports!4234 cause cargo build scripts to be built
for and run on the host (native) architecture, so their dependencies
must be present in the native chroot.
pmbootstrap can't tell which of the dependencies specified in
makedepends are actually needed by build scripts, so just duplicate all
of them in the native chroot.
Acked-by: Caleb Connolly <kc@postmarketos.org>
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230710135001.184769-1-otto.pflueger@abscue.de%3E
With this code path, pmbootstrap would start a distccd + sshd in the
native chroot, and configure it so it runs the cross compiler. The
foreign arch chroots would then call this cross compiler from localhost
by calling the distcc client instead of gcc.
This code has been obsoleted by the much simpler crossdirect in 2019.
Let's finally remove it.
Fixes: issue 2179
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Clayton Craft <clayton@craftyguy.net>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230613161437.570196-4-ollieparanoid@postmarketos.org%3E
pmb.config.sudo expects a list of commands + args, so when a string is
passed (e.g. "true"), it results in pmb trying to execute the equivalent
of "$ t r u e":
(8/119) Installing linux-purism-librem5 (6.3.4-r0)
doas: t: command not found
doas: t: command not found
doas: t: command not found
doas: t: command not found
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230613141929.15718-1-clayton@craftyguy.net%3E
This makes sure that the "/etc/localtime" file being created points to
the tzdata directory (/usr/share/zoneinfo), instead of to the custom
"/etc/zoneinfo" created by alpine to save space. This is relevant
because it otherwise will point to a directory that contains
incomplete tzdata, and can produce unexpected results in some circumnstances.
Signed-off-by: Pablo Correa Gómez <ablocorrea@hotmail.com>
Tested-by: Clayton Craft <clayton@craftyguy.net>
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230611150743.23310-3-ablocorrea@hotmail.com%3E
Currently we're already showing a long list of unsupported releases,
which should not really be used by any user. Hide them by just showing
the first 3 releases in the list which avoids adding complicated custom
logic to e.g. channels.cfg.
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230607205714.84945-1-luca@z3ntu.xyz%3E
For kernel selection we already choose a default like this, which makes
sense since there's no point in having a preselected choice which
doesn't exist (anymore). Also useful for some test suites where it runs
"yes | pmbootstrap init" which would hang on this question.
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230607204449.84020-2-luca@z3ntu.xyz%3E
A long time ago we renamed the flash_system action into flash_rootfs.
Since we still kept some variables around, it's finally time to clean
that up.
Keep backwards compatibility for now since we cannot update pmaports at
the same time since the new deviceinfo names won't be supported in older
pmbootstrap versions.
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230605220329.14328-3-luca@z3ntu.xyz%3E
Ben Westover
Oliver Smith
Clayton Craft
Luca Weiss
Pablo Correa Gómez
Andras Sebok
Lauren N. Liberda
Anton Bambura
hexaheximal
Affe Null
Pablo Correa Gómez