kernel is named /boot/vmlinuz now, looking at the filename will no
longer tell us what flavor it is. This now will look at
/usr/share/kernel, which has always contained the kernel 'flavor', and
since we currently only install 1 kernel these days, guarding this with
pmaports.cfg should be unnecessary. In the worst case (if there are
multiple kernel 'flavors' installed), it'll just grab the first one and
return it.
Use the dtb-appended kernel file, e.g. postmarketos-exynos4-dtb instead
of postmarketos-exynos4, if it is available. This is needed to flash a
mainline kernel with appended dtb to isorec devices.
Change the 'not value' condition raising the '...value for this variable
is None!' error to 'value is None' so it doesn't raise when the value is
something else that evaluates to boolean False, like an empty string.
Remove the special treatment for $KERNEL_CMDLINE here by making it
default to empty string.
Flashes device vbmeta partition (can be overriden with
"flash_fastboot_partition_vbmeta" setting in deviceinfo)
with custom vbmeta.img which has verity flag disabled,
so device can boot postmarketOS with no problems.
While at it, also remove unnecessary "#!/usr/bin/env python3" in files
that only get imported, and adjust other empty/comment lines in the
beginnings of the files for consistency.
This makes files easier to read, and makes the pmbootstrap codebase more
consistent with the build.postmarketos.org codebase.
asus-me176c has a Fastboot interface that can be used for flashing,
but in postmarketOS we do not use Android boot images for it.
This is because is it not very practical - the boot partition is
quite small and there is a (custom) EFI bootloader that can boot
directly from any other FAT32 partition.
At the moment the installation process is manual:
1. pmbootstrap install --split to have separated boot (FAT32)
and rootfs images
2. pmbootstrap export
3. Flash boot and rootfs images manually using Fastboot
The "fastboot-bootpart" flasher implements that process in a more
convenient way. When a device uses the "fastboot-bootpart" flasher:
- We generate --split images on "pmbootstrap install" by default.
(This can be disabled using --no-split instead.)
- pmbootstrap flasher flash_kernel flashes the raw boot partition
(not an Android boot image) using Fastboot, just like the rootfs.
There are some limitations that could be improved in the future:
- "fastboot-bootpart" is not offered in the device wizard.
I think it is special enough that no-one will be starting with it,
and the difference to normal "fastboot" might be confusing.
- Support "pmbootstrap flasher boot". asus-me176c does not support
"fastboot boot" properly, but theoretically we could still generate
Android boot images to use when booting an image directly.
- At the moment the boot partition image is not regenerated when
using "pmbootstrap flasher flash_kernel" (unlike when using Android
boot images). "pmbootstrap install" needs to be run manually first.
At the moment, pmbootstrap updates the kernel and the initfs whenever
using the flasher or export. This is useful, but sometimes you just want
to boot exactly the same kernel several times. In that case, having to wait
several seconds for the (redundant) update to complete is quite annoying.
Add a --no-install option that allows skipping the kernel/initfs update.
This reverts commit 6fb5b28e2f.
The -i option was removed from fastboot, so we can't use it anymore
unless we fork the package. There was only one device using it,
amazon-thor. I will add a note to the wiki page.
Fixes#1830.
This adds flasher support for uuu, a utility used by NXP devices for
flashing images.
The flasher expects a uuu command list script to be installed in the
device rootfs at /usr/share/uuu/flash_script.lst.
It is dangerous to flash the boot partition on the Ouya. Doing so can
result in a bricked device. Allow deviceinfo to blacklist partitions from
ever being flashed.
Allow changing the kernel partition for fastboot and heimdall in
deviceinfo and on the fly while doing "pmbootstrap flasher
flash_kernel". Also allow changing the partition for
"... flash_rootfs" with fastboot (this was only possible with
heimdall so far).
Introduce two new deviceinfo variables:
* flash_fastboot_partition_kernel
* flash_fastboot_partition_system
This is useful for devices with dual partitioning that have boot_a
and boot_b.
Follow-up to !1373, where `pmbootstrap flasher flash_system` was
replaced with `pmbootstrap flasher flash_rootfs`. We still had used
terms like "system partition" in a lot of places.
This commit replaces it everywhere, so it's clear that we're talking
about the pmOS rootfs (which may or may not be installed to Android's
system partition).
This makes the flasher work when no flash_method attribute exists on
the args variable, which happens when it is invoked through the
pmbootstrap export --odin command. This is a regression introduced
in b29cc877a7
This fixes#1527
* Change `pmbootstrap flasher flash_system` command to
`pmbootstrap flasher flash_rootfs`
* The old command still works, but all references have been changed to
the new command
* Remove obsolete `pmbootstrap flasher export` (that was changed to
`pmbootstrap export` a few months ago)
* Update `README.md` and ZSH auto completion
* Change the description of the generated rootfs image (not talking
about a system image anymore, mention that it has subpartitions)
* Better description of `pmbootstrap flasher flash_rootfs --partition`
* Rename deviceinfo variable flash_methods to flash_method
* Update pmb.config.deviceinfo_attributes / add sanity check
* Add test case that parses all deviceinfo files
This adds a new deviceinfo 'flash_fastboot_max_size' used for
preventing fastboot from flashing a system partition that is too
large. Some devices do not support flashing over a certain size
(e.g. 500MB).
* Allow to specify a custom username in "pmbootstrap init"
* Build chroots have "pmos" instead of "user" as username now
* Installation user UID is 1000 now (as in all other Linux distributions)
* Adjust autologins
* postmarketos-base: enable wheel group for sudo, removed previous sudoers file
* Implement safe upgrade path:
We save the version of the work folder format now, in $WORK/version.
When this file does not exist, it defaults to 0.
In case it does not match the currently required version
(pmb.config.work_version), then ask the user if it should
automatically be upgraded.
* Check kernel config
* Allow specifying multiple kernel packages, and also no packages
which defaults to scanning all kernel configs (it is super fast
anyway)
* Add the check to Travis CI
* Adjust existing kernel configs, so they pass the kconfig_check.
(We've had to put in a lot of defaults in the aarch64
linux-postmarketos configs, that's why the diff is a bit unclean.)
* Increase modified kernel pkgrels
* moved export code to pmb/export and split it up
* added deprecation notice to "pmbootstrap flasher export"
* made "pmbootstrap export" work
* adjusted the "pmbootstrap flasher export" hints in the code
* Quote architecture in logging message for easier reading
* Added shortcut arguments for --rootfs, --buildroot and --suffix
* Simply remove beforehand link to nowhere if exists (fix#278)
Fixed crash when symlink already existed but pointed to a non-existing location
* Various improvements for 'pmbootstrap export' (Fix#232)
* Do not try to generate the system image, but print a notice that
it was not generated yet
* Display export path
* New default path: /tmp/postmarketOS-export (instead of current
working dir)
* Create the export folder, if it does not exist yet
* Prettier output in the export message
* Adjust export message in install for consistency
Caleb Connolly
Oliver Smith
Ultracoolguy
Clayton Craft
afeuerstein
Caio Fontes
HenriDellal
Alexey Min
Minecrell
Robert Yang
Ion Agorria
Oliver Smith
Martijn Braam
Attila Szöllősi
Daniele Debernardi
clayton craft
Pablo Castellano
Attila Szöllősi