Adds an optional deviceinfo variable, `deviceinfo_rootfs_image_sector_size`,
which specifies the logical sector size of the device's storage.
Some devices made after 2016 with UFS storage uses 4096 byte sectors
instead of the normal 512 bytes. The partition table in our rootfs
must match, otherwise the root filesystem won't mount on the device.
This change passes the sector size to `losetup` when creating the image
if the deviceinfo specifies it, so the image will have the correct
sector size.
If the deviceinfo doesn't specify the new option, the behaviour
is the same as previous versions of pmbootstrap.
Note that the sector size option only works on Linux 4.14 and above,
so pmbootstrap should be run on a >4.14 computer when installing to
devices with non-standard sector size.
To find if a device needs this parameter, run `fdisk -l` on the device.
If the output shows
`Note: sector size is 4096 (not 512)`
then add `deviceinfo_rootfs_image_sector_size="4096"` to the deviceinfo.
This is needed by the Pixel 3 XL (google-crosshatch) port.
See https://gitlab.com/postmarketOS/pmbootstrap/issues/1696.
Follow-up to !1373, where `pmbootstrap flasher flash_system` was
replaced with `pmbootstrap flasher flash_rootfs`. We still had used
terms like "system partition" in a lot of places.
This commit replaces it everywhere, so it's clear that we're talking
about the pmOS rootfs (which may or may not be installed to Android's
system partition).
* Travis and Coveralls badges
* aports: instead of <https://github.com/postmarketOS>, use
<https://postmarketos.org>
* References to full URLs to issues and pull requests replaced with
a hash and the number
* grsec check: simplify error message, remove link to github issue
(nobody is using that anymore anyway)
This allows the user to talk to networkmanager to manage the system
connections. As it is mentioned in networkmanager pre-install.
```
Executing networkmanager-1.10.6-r0.pre-install
*
* To setup system connections, regular users must be member of 'plugdev' group.
```
The plugdev group gets created in the post-install hook of
networkmanager. Not all UIs depend on networkmanager, which means that
the group may not exist at installation time when we try to add the
user to the group in the python code. Therefore we create the group
first.
* change "pmbootstrap kconfig_check" to "pmbootstrap kconfig check"
* change "pmbootstrap menuconfig" to "pmbootstrap kconfig edit [-x|-g]"
(with legacy alias, because the first syntax was referenced to a lot)
* enable X11 interfaces: -x: xconfig, -g: gconfig
* new function to copy the xauthority file:
pmb.chroot.other.copy_xauthority()
* remove menufconfig() function from the kernel template and all kernel
aports ([skip ci] because it would rebuild all kernels and run out of
time). Alpine has dropped this as well, and it wouldn't work with the
new code anyway.
* Usage: pmbootstrap install --split
* Make obvious that export is the next step when split images are created
* Fix note for missing rootfs image on export
* Change wording from "system image" to "rootfs image"
* The idea was to show the note only when the rootfs image was not
generated yet. But this was broken, because the path we checked for
was missing the chroot path prefix (which is added now).
* Also don't display the message, when the split image files exist
The postmarketos-base package used to make the user part of the "video"
and "audio" groups. However, this did not work reliably, and we were
adding the "wheel" group in "pmbootstrap install" anyway.
Now all groups get added in "pmbootstrap install", and the names of the
groups have been moved to `pmb.config.install_user_groups`.
* As discussed in IRC/matrix, we're removing `linux-postmarketos-lts`
for now. The kernel isn't used right now, and we save lots of
maintenance effort with not updating it every week or so.
* new config option `"kernel"` with possible values:
`"downstream", "mainline", "stable"` (downstream is always
`linux-$devicename`)
* ask for the kernel during `pmbootstrap init` if the device package
has kernel subpackages and install it in `_install.py`
* postmarketos-mkinitfs: display note instead of exit with error when
the `deviceinfo_dtb` file is missing (because we expect it to be
missing for downstream kernels)
* device-sony-amami:
* add kernel subpackages for downstream, mainline
* set `deviceinfo_dtb`
* device-qemu-amd64: add kernel subpackages for stable, lts, mainline
* test cases and test data for new functions
* test case that checks all aports for right usage of the feature:
* don't mix specifying kernels in depends *and* subpackages
* 1 kernel in depends is maximum
* kernel subpackages must have a valid name
* Test if devices packages reference at least one kernel
* Remove `_build_device_depends_note()` which informs the user that
`--ignore-depends` can be used with device packages to avoid building
the kernel. The idea was to make the transition easier after a change
we did months ago, and now the kernel doesn't always get built before
building the device package so it's not relevant anymore.
* pmb/chroot/other.py:
* Add autoinstall=True to kernel_flavors_installed(). When the flag
is set, the function makes sure that at least one kernel for the
device is installed.
* Remove kernel_flavor_autodetect() function, wherever it was used,
it has been replaced with kernel_flavors_installed()[0].
* pmb.helpers.frontend.py: remove code to install at least one kernel,
kernel_flavors_installed() takes care of that now.
* Change `pmbootstrap flasher flash_system` command to
`pmbootstrap flasher flash_rootfs`
* The old command still works, but all references have been changed to
the new command
* Remove obsolete `pmbootstrap flasher export` (that was changed to
`pmbootstrap export` a few months ago)
* Update `README.md` and ZSH auto completion
* Change the description of the generated rootfs image (not talking
about a system image anymore, mention that it has subpartitions)
* Better description of `pmbootstrap flasher flash_rootfs --partition`
* Save "" (empty string) in the user's config as hostname if the user
let it default to the name of the device. That way, when the device
gets changed, the user won't get the old device's name as hostname
by accident.
* Add a test case
Here are the changes necessary in pmbootstrap to make proprietary
software installed onto the device (firmware and userspace drivers)
optional (#756). To full close the issue, we need to apply this concept
to all device packages we already have in a follow-up PR.
Changes:
* New config file options nonfree_firmware and nonfree_userland, which
we ask for during "pmbootstrap init" if there are non-free components
for the selected device.
* We find that out by checking the APKBUILD's subpakages: The non-free
packages are called $pkgname-nonfree-firmware and
$pkgname-nonfree-userland.
* During "pmbootstrap init" we also show the pkgdesc of these
subpackages. Parsing that is implemented in
pmb.parse._apkbuild.subpkgdesc(). It was not implemented as part of
the regular APKBUILD parsing, as this would need a change in the
output format, and it is a lot *less* code if done like in this
commit.
* pmb/parse/apkbuild.py was renamed to _apkbuild.py, and
pmb/install/install.py to _install.py: needed to call the function in
the usual way (e.g. pmb.parse.apkbuild()) but still being able to
test the individual functions from these files in the test suite.
We did the same thing for pmb/build/_package.py already.
* Install: New function get_nonfree_packages() returns the non-free
packages that will be installed, based on the user's choice in
"pmbootstrap init" and on the subpackages the device has.
* Added test cases and test data (APKBUILDs) for all new code,
refactored test/test_questions.py to have multiple functions for
testing the various questions / question types from
"pmbootstrap init" instead of having it all in one big function.
This allows to use another aport folder for testing the new
non-free related questions in init.
It used to have an entry for /mnt/pmbootstrap-packages, which only
makes sense while working on the chroot with pmbootstrap. After the
installation on the device, there's no repo in that path.
Furthermore, empty lines were added to the recovery installer script
for readability (thanks @ata2001!)
* Don't ask for the mesa driver when the Qemu arch is not the
native arch and always use swrast in that case
* qemu-vexpress: use LTS kernel
* qemu-aarch64: use drm-backend for weston
* Rename deviceinfo variable flash_methods to flash_method
* Update pmb.config.deviceinfo_attributes / add sanity check
* Add test case that parses all deviceinfo files
The mesa driver, which ends up in the installation image, needs to be known
before the installation is done (in other words: when running the qemu action,
it is to late as the image has already been generated). That's why one can
choose the Qemu mesa driver in `pmbootstrap init` now:
```
Device [qemu-amd64]:
Which mesa driver do you prefer for your Qemu device? Only select something other
than the default if you are having graphical problems (such as glitches).
Mesa driver (dri-swrast/dri-virtio) [dri-virtio]:
```
It is still possible to select `dri-swrast`, because `dri-virtio` may not work
in all cases, and that way we could easily debug it or experiment with other
mesa drivers (e.g. the "vmware" one, which is supported by mesa and Qemu).
Other changes:
* `pmbootstrap qemu` accepts a `--display` variable now, which passes the value
directly to `qemu`'s `display` option. It defaults to `sdl,gl=on` (@PureTryOut
reported that to work best with plasma mobile on his PC). `--display` and
`--spice` (which is still working) are mutually exclusive.
* Removed obsolete telnet port pass-through: We only use the debug telnet port
since osk-sdl has been merged.
* Add show-cursor to the Qemu command line, so it shows a cursor in X11
* Refactored the spice code (`command_spice` only returns the spice command,
because it has all necessary information already) and the spice port can be
specified on the commandline now (previously it was hardcoded in one place and
then always looked up from there).
* Start comments with capital letters.
* Keep the log on the screen a bit shorter (e.g. Qemu command is written to the
"pmbootstrap log" anyway, so there's no need to display it again).
* linux-postmarketos-stable: Adjust kernel configs
x86_64, armhf: enable as modules:
CONFIG_DRM_VIRTIO_GPU, CONFIG_VIRTIO_PCI, CONFIG_VIRTIO_BALLOON
aarch64: all 3 options were already enabled as built-in (no change)
* Set '-vga virtio' for mesa-dri-virtio
The method of 'install detection' used here is to look for a partition with pmOS_boot in the partition label. It's not a guarantee, but it works when FDE is enabled without having to unlock the partition to read files within it.
* Allow to specify a custom username in "pmbootstrap init"
* Build chroots have "pmos" instead of "user" as username now
* Installation user UID is 1000 now (as in all other Linux distributions)
* Adjust autologins
* postmarketos-base: enable wheel group for sudo, removed previous sudoers file
* Implement safe upgrade path:
We save the version of the work folder format now, in $WORK/version.
When this file does not exist, it defaults to 0.
In case it does not match the currently required version
(pmb.config.work_version), then ask the user if it should
automatically be upgraded.
This checks for /sys/modules/loop before modprobing the loop module. My
understanding is that if this module is built into the kernel, that this
directory is still created. For a kernel without loop built in,
losetup.py will try to load the module using modprobe.
This only displays the ssh key note if no keys are found, since it's
confusing if a user has 1 key but not the other. In that case, the
message would be displayed despite copying one of the keys over.
This is a workaround for #429, until the iteration count can be
specified directly in cryptsetup.
* Add default iter-time option, and option to override
* set SHA1 default hash for luksFormat, add option to override
* [RX51] load omap-sham in initramfs for HW accel. sha1
* moved export code to pmb/export and split it up
* added deprecation notice to "pmbootstrap flasher export"
* made "pmbootstrap export" work
* adjusted the "pmbootstrap flasher export" hints in the code
Zhuowei Zhang
Oliver Smith
Martijn Braam
NotKit
Marti Raudsepp
Bhushan Shah
steamport
Daniele Debernardi
Lionel Duboeuf
Pavel Machek
Attila Szöllősi
clayton craft
Pablo Castellano
Pavel Machek
Attila Szöllősi
Jean Lucas
Brian Otto