Adjust to pkgrel bump of the hello-world package in pmaports. Of course
it would be best if the tests did not depend on specific versions in
pmaports.git, but as long as they do, we need to keep them in sync.
This fixes the currently failing CI.
Generate APKBUILDs with dependencies sorted and placed one per line.
The dependency lists changed are
- depends in pmb/aportgen/device.py
- makedepends in pmb/aportgen/linux.py
Sort dependency lists in test/test_aportgen_device_wizard.py
assertions.
Unmaintained devices are device packages that:
- Are known to be broken in some way without an active maintainer
who can investigate how to fix it, or
- Have not received any updates for a very long time, or
- Are discouraged from using because they are just intended for testing.
An example for this are ports using the downstream kernel for devices
which have a mainline port that is working quite well.
Unmaintained devices are still built by bpo (otherwise it would not make
sense to keep them), but they do not show up in "pmbootstrap init".
However, it is possible to manually select them by entering the name.
pmbootstrap will warn in that case.
Unmaintained packages should have a # Unmaintained: <reason> comment
in the APKBUILD, this comment is displayed in "pmbootstrap init"
so that the user knows why the device should not be used unless they
know what they are doing.
Made changes to limit the line length in following files,
- pmb/parse/bootimg.py
- pmb/parse/depends.py
- pmb/parse/kconfig.py
- test/test_parse_depends.py
Added the above files in E501 flake8 command list.
Substitute f-string for string concatenation.
Made changes to limit the line length in following files,
- pmb/parse/_apkbuild.py
- pmb/parse/apkindex.py
- pmb/parse/binfmt_info.py
- pmb/parse/deviceinfo.py
- test/test_parse_apkbuild.py
Added the above files in E501 flake8 command list.
Substitute f-string for string concatenation.
Support branches, so pmbootstrap won't fail if v20.05 is selected:
ERROR: You have an outdated version of the 'apk' package manager installed
(your version: 2.10.5-r1, expected at least: 2.12.1-r0).
Move the logic for this check to pmb.helpers.apk.check_outdated and
adjust the test.
This fixes the CI failure in test_crossdirect_rust, which uses the
stable channel. (My bad for not creating this patch earlier, while at
the same time explaining in the creating pmbootstrap release instructions,
that this minimum apk version should be adjusted.)
Remove "_static" from the variable name, as this version isn't just
used to compare apk-tools-static's version (used to set up chroot), but
also for regular apk-tools before entering chroots.
Many of pmbootstrap's actions require root rights. When after requesting
sudo access pmbootstrap takes longer than the sudo timeout interval to finish
execution, the password will have to be entered again on the next sudo
action.
This change adds an opt-in feature to run sudo -v in a background loop
in order to prevent having to enter the password more than once for a single
pmbootstrap run. The loop runs as a daemon timer which automatically gets
canceled when pmbootstrap exits.
Closes: #1677
Replace the "kill_as_root" argument with a much simpler "sudo" argument
and remove the now obsolete check for the output mode of "kill_as_root".
"kill_as_root" would only get set to True if both conditions are met:
a) command is running with sudo
b) command is running with an output mode ("log" or "stdout") where
pmb.helpers.run_core would kill it if it does not output anything
before a timeout is reached
The new "sudo" argument just indicates if the command is running with
sudo (a), regardless of the output mode (b).
The sideload command runs the supplied names through the pmbootstrap
buildsystem to make sure they're up-to-date, then uses scp from the host
to copy the built apks to /tmp on the phone and installs them through
ssh.
If the --install-key option is set then it will also copy over the apk
key that's used for signing the packages built by pmbootstrap in case
the postmarketOS install on the device isn't build by the same machine
as you're sideloading from.
This adds a new output mode "pipe" that is identical to the existing
"background" mode except for that its stdout is redirected into a
pipe so that it can be retrieved.
Enforce the E501 length check of max 79 characters for all files where
this test passes already. We can add more to the list as we adjust them
and eventuelly require the check for all files.
This adds a new commandline flag -E / --extra-space for
specifying the amount of additional space to be added to
the image size to work around cases where the automatically
determined size turns out to not actually be enough.
The value is also asked for in the "Additional options"
section of the interactive mode.
Fixes: #1904
Packages like binutils-*, busybox-static-*, gcc-*, grub-efi-*, musl-*
are only needed for the native architecture during cross compilation.
Don't bother with trying to build them for other arches to save time and
to avoid getting stuck frequently at "armv7/binutils-aarch64" etc.
A few people like to use pmbootstrap on aarch64 hosts (e.g. PineBook
Pro), so let's make it available for aarch64 again when we can build
aarch64 packages natively in CI and bpo. (They do get stuck there right
now, because of qemu user emulation.)
Related: https://gitlab.com/postmarketOS/build.postmarketos.org/-/issues/75
Some Mediatek devices have a special 512-byte header around the zImage
which must be generated so the device boots.
Support for that exists for a while in postmarketOS but detection was
missing. Add that.
This test is failing with Alpine edge, because x86_64 has a different
rustc version than armv7:
found crate `std` compiled by an incompatible version of rustc
Run the test with the latest Alpine stable version instead, where it is
more likely that rustc has the same version across all arches.
Let UI meta-packages specify apps in "pmb_recommends" to be explicitly
installed by default, and not implicitly as dependency of the UI
meta-package ("depends"). Therefore make these apps uninstallable,
without removing the meta-package.
Add pmbootstrap install --no-recommends to disable this feature.
Alpine APKBUILDs have the concept of "provider priorities" that affect
the choice of the provider to install when multiple packages provide
a virtual package.
One use case for this is to allow installation of different firmware
versions. bq-paella can run unsigned firmware, therefore you have the
choice between using the original firmware from the manufacturer, or
a slightly newer version from Qualcomm for the Dragonboard 410c.
We add provides="firmware-qcom-msm8916-wcnss" (the "virtual package")
to both firmware-qcom-db410c-wcnss and firmware-bq-picmt-wcnss.
At this point, attempting to install "firmware-qcom-msm8916-wcnss"
would still fail with apk. (Because it does not know which provider
to install.)
To pick a default we can set e.g. provider_priority=100 for
firmware-qcom-db410c-wcnss (the slightly newer version).
In that case, firmware-qcom-db410c-wcnss should be installed by default.
However, the user can choose to do "apk add firmware-bq-picmt-wcnss"
to override the default choice in case of problems. In that case,
the conflicting firmware-qcom-db410c-wcnss will be automatically removed.
At the moment, pmbootstrap does not respect the "provider_priority" at all.
In the above case, it would always install "firmware-bq-picmt-wcnss"
during "pmbootstrap install" since that has the shortest name.
Extend the pmbootstrap code to pick a provider with the highest priority
(if any of the providers has a priority set).
Copy from current pmaports master, so pmbootstrap doesn't complain about
missing deviceinfo_codename when parsing it. Right now pmbootstrap
doesn't complain about this, but with the next patch it will attempt to
parse the file.
This replaces the year from 1337 to 2012 too, but let's rather have it
slightly more maintainable than introducing a diff for a funny reference.
"Chassis" defines the what kind of device a device is. Currently the
following standardized types exist:
"desktop", "laptop", "convertible", "server", "tablet", "handset",
"watch", "embedded", "vm", "container"
This property is exposed by org.freedesktop.hostname1 (e.g.
openrc-settingsd) and can be used by applications for example to display
appropriate strings instead of "About this phone" for non-phone devices.
Migrate to workdir version 5 and move already built packages into the edge
channel subdir, for example:
$WORK/packages/x86_64/hello-world-1-r5.apk
to:
$WORK/packages/edge/x86_64/hello-world-1-r5.apk
The build.postmarketos.org code has already been adjusted to find built
packages in either directory structure.
Use mirrordir_pmos and mirrordir_alpine from channels.cfg to generate
the mirror URLs for postmarketOS and Alpine, which get written to
/etc/apk/repositories and which postmarketOS uses to download the
APKINDEX files.
Remove hardcoded "master" at the end of the postmarketOS mirror and use
mirrordir_pmos instead (which is "master" for the edge channel). Let the
postmarketOS mirror end in a '/' for consistency with the Alpine mirror
in pmb/config/__init__.py.
Remove obsolete --alpine-version. To experiment with a different Alpine
version, one should pass a custom --config-channels from now on.
Ask for release channel and switch pmaports branch to the related branch
defined in channels.cfg.
Store in pmbootstrap.cfg whether the user chose a channel (boolean). If
the user did not choose a channel yet, suggest the recommended channel
from channels.cfg (currently "edge").
Prepare to base postmarketOS on Alpine stable by parsing the new
channels.cfg file in pmaports.git, that describes which channel
needs which branches and mirror dirs from postmarketOS and Alpine.
Use the information in pmb.helpers.git.get_branches_official() first,
more is coming in follow-up commits.
Read the file from origin/master, so we get the latest fetched version
even if the last checked out master branch is not up-to-date (think of
currently checked out release branch instead of master, master will
never be updated to point to latest origin/master). Allow to override
the file with a new --config-channels parameter.
Related: https://postmarketos.org/channels.cfg
Let apkbuild-lint check options again, and pass the pmbootstrap specific
options with the new CUSTOM_VALID_OPTIONS variable. Add a test case and
adjust pmb.helpers.lint.check to return the output of apkbuild-lint, so
we can properly test it.
Related: https://gitlab.alpinelinux.org/Leo/atools/-/merge_requests/28
Fixes: pmaports#553
The `mesa-dri-swrast` package was merged into `mesa-dri-gallium` in Alpine.
(See 298e20d04f)
The old alias might be removed in the future, so change the generated APKBUILDs
to depend on `mesa-dri-gallium` instead.