Install specific filesystem tools right before they are needed, instead
of installing all filesystem tools that we might need beforehand. This
is in preparation to support f2fs.
Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
Fix error when CPU count is more than 8 while emulating a non-native
platform:
qemu-system-aarch64: Number of SMP CPUs requested (12) exceeds max CPUs supported by machine 'mach-virt' (8)
Signed-off-by: Mark Hargreaves <clashclanacc2602@gmail.coM>
Made changes to limit the line length in following files for #1986,
- pmb/install/_install.py
- pmb/install/blockdevice.py
- pmb/install/losetup.py
- pmb/install/partition.py
Added the above files in E501 flake8 command list.
Substitute f-string for string concatenation.
Increase the boot partition size from 128 MiB to 256 MiB, as we are
already close to reaching the current limit. By having twice the size,
it should be possible to have atomic replacements of all initramfs
related files.
Translate the pmaports channels "stable" to "v20.05" and "stable-next"
to "v21.03", so these have the same channel name as the pmaports.git
branch name.
The original plan was to switch the "stable" channel from the "v20.05"
branch to the "v21.03" branch when the release is done. However, now
that we are close to that, I'm realizing that this would not be useful.
It would lead to conflicts in the dir with locally built packages
(default: ~/.local/var/pmbootstrap/packages/$CHANNEL). And it would make
it awkward to go back to a previous branch (we may name it old-stable
for the time being, but what after that, old-old-stable?).
Split images have /dev/installp1 and /dev/installp2 but no
/dev/install to place the firmware, so it will actually create that file
in devfs where it might run out of space since it's only 1MB big
Leave some visual space before the flashing and ssh daemon information
blocks, so they don't get overlooked by the user:
[12:50:31] *** (4/4) FILL INSTALL BLOCKDEVICE ***
[12:50:31] (native) copy rootfs_qemu-amd64 to /mnt/install/
[12:50:36]
[12:50:36] *** FLASHING INFORMATION ***
[12:50:36] Refer to the installation instructions of your device, or the generic install instructions in the wiki.
[12:50:36] https://wiki.postmarketos.org/wiki/Installation_guide#pmbootstrap_flash
[12:50:36]
[12:50:36] *** SSH DAEMON INFORMATION ***
[12:50:36] SSH daemon is disabled (--no-sshd).
[12:50:36]
[12:50:36] NOTE: chroot is still active (use 'pmbootstrap shutdown' as necessary)
[12:50:36] Done
Change "configured" to "valid" in the error message:
Selected kernel (mainline_modem) is not configured for device bq-paella.
Please run 'pmbootstrap init' to select a valid kernel.
"configured" makes one think of "pmbootstrap init", but the valid
kernels are defined in the APKBUILD. Therefore I think "not valid" fits
better here.
Run setup_login() while creating the installer OS too, in order to
disable passwordless root login.
Note that this may sound like a security flaw, but it isn't.
* setup_login already ran for the target OS, meaning after the
installation is done, one is not be able to login as root without
password
* root login without password was only possible via serial console (or by
attaching a keyboard), not via SSH
* getting root rights via serial in the installer OS is actually desired
for debugging, we add a debug user with sudo set up by default:
https://wiki.postmarketos.org/wiki/On-device_installer#Debug_user
So even though this isn't a problem, disable it to avoid confusion.
Adjust to pkgrel bump of the hello-world package in pmaports. Of course
it would be best if the tests did not depend on specific versions in
pmaports.git, but as long as they do, we need to keep them in sync.
This fixes the currently failing CI.
Generate APKBUILDs with dependencies sorted and placed one per line.
The dependency lists changed are
- depends in pmb/aportgen/device.py
- makedepends in pmb/aportgen/linux.py
Sort dependency lists in test/test_aportgen_device_wizard.py
assertions.
Unmaintained devices are device packages that:
- Are known to be broken in some way without an active maintainer
who can investigate how to fix it, or
- Have not received any updates for a very long time, or
- Are discouraged from using because they are just intended for testing.
An example for this are ports using the downstream kernel for devices
which have a mainline port that is working quite well.
Unmaintained devices are still built by bpo (otherwise it would not make
sense to keep them), but they do not show up in "pmbootstrap init".
However, it is possible to manually select them by entering the name.
pmbootstrap will warn in that case.
Unmaintained packages should have a # Unmaintained: <reason> comment
in the APKBUILD, this comment is displayed in "pmbootstrap init"
so that the user knows why the device should not be used unless they
know what they are doing.
Made changes to limit the line length in following files,
- pmb/parse/bootimg.py
- pmb/parse/depends.py
- pmb/parse/kconfig.py
- test/test_parse_depends.py
Added the above files in E501 flake8 command list.
Substitute f-string for string concatenation.
Made changes to limit the line length in following files,
- pmb/parse/_apkbuild.py
- pmb/parse/apkindex.py
- pmb/parse/binfmt_info.py
- pmb/parse/deviceinfo.py
- test/test_parse_apkbuild.py
Added the above files in E501 flake8 command list.
Substitute f-string for string concatenation.
When unmounting SD card after `pmbootstrap install --sdcard=...`
it takes a lot of time for kernel to sync filesystem cache
before actual umounting happehs. This looks like pmbootstrap is
stuck, so before doing unmount print a message to inform user of
what's happening, in case `--sdcard` was used.
The CDN was disabled, as packages from there often resulted in 'BAD
signature' after Alpine's big musl-1.2 rebuild for 32-bit arches. This
was almost half a year ago, so the CDN should have recovered.
This reverts commit 78f43d254e.
Support branches, so pmbootstrap won't fail if v20.05 is selected:
ERROR: You have an outdated version of the 'apk' package manager installed
(your version: 2.10.5-r1, expected at least: 2.12.1-r0).
Move the logic for this check to pmb.helpers.apk.check_outdated and
adjust the test.
This fixes the CI failure in test_crossdirect_rust, which uses the
stable channel. (My bad for not creating this patch earlier, while at
the same time explaining in the creating pmbootstrap release instructions,
that this minimum apk version should be adjusted.)
Remove "_static" from the variable name, as this version isn't just
used to compare apk-tools-static's version (used to set up chroot), but
also for regular apk-tools before entering chroots.
Add comments to two functions, that if they are changed, the logic also
needs to be updated in ondev-preapre-internal-storage.sh of
postmarketos-ondev.git.
With postmarketos-ondev >= 0.4.0, have a different label for the boot
partition in the installer OS, so the postmarketOS initramfs can find
the proper partition to boot. Even if the boot partition is available
twice (once installed on eMMC, once as part of installer OS on SD card).
pmOS_inst_boot instead of pmOS_install_boot because of character limit.
Replace "rootfs" with generic image, because the function will be used
for a second storage too. Refer to IMAGE_SIZE, as it is shown in the
help output.
Bobby The Builder
Mark Hargreaves
Oliver Smith
Anri Dellal
Shubham Naik
MightyM17
Luca Weiss
JuniorJPDJ
Martijn Braam
Michael Kupfer
nybbled
Minecrell
Clayton Craft
Alexey Min
Dylan Van Assche