Touch the file /in-pmbootstrap in chroots so that we can avoid
performing automated actions that should only happen on a real device
(like flashing the kernel).
Support branches, so pmbootstrap won't fail if v20.05 is selected:
ERROR: You have an outdated version of the 'apk' package manager installed
(your version: 2.10.5-r1, expected at least: 2.12.1-r0).
Move the logic for this check to pmb.helpers.apk.check_outdated and
adjust the test.
This fixes the CI failure in test_crossdirect_rust, which uses the
stable channel. (My bad for not creating this patch earlier, while at
the same time explaining in the creating pmbootstrap release instructions,
that this minimum apk version should be adjusted.)
Remove "_static" from the variable name, as this version isn't just
used to compare apk-tools-static's version (used to set up chroot), but
also for regular apk-tools before entering chroots.
Replace the "kill_as_root" argument with a much simpler "sudo" argument
and remove the now obsolete check for the output mode of "kill_as_root".
"kill_as_root" would only get set to True if both conditions are met:
a) command is running with sudo
b) command is running with an output mode ("log" or "stdout") where
pmb.helpers.run_core would kill it if it does not output anything
before a timeout is reached
The new "sudo" argument just indicates if the command is running with
sudo (a), regardless of the output mode (b).
Do not attempt to upgrade packages in the rootfs chroot when running
"pmbootstrap install".
This was responsible for placing every single package in /etc/apk/world
(which should only hold the packages explicitly installed), because the
upgrade function was literally implemented as getting a list of
installed packages and explicitly running pmb.chroot.apk.install on each
of them. The intention was to rebuild these packages if they were outdated,
I guess I didn't realize that this makes /etc/apk/world unusable when I
introduced this three years ago in 51bdc243 ("Properly rebuild/install
packages when something changed").
Remove pmb.chroot.apk.upgrade altogether, because:
1) pmb.install.install builds and upgrades outdated pmaports
2) pmb.install.install is the only user of pmb.chroot.apk.upgrade
3) 'pmbootstrap init' is warning that the chroots do not get upgraded
automatically, so let's not go against that expectation. users who
want an updated rootfs chroot can simply run zap and install again.
Replace it with a call to pmb.helpers.repo.update, because we still need
to update the APKINDEX files before attempting to build/install the
generated list of packages.
Some Mediatek devices have a special 512-byte header around the zImage
which must be generated so the device boots.
Support for that exists for a while in postmarketOS but detection was
missing. Add that.
Add a question at the end of "pmbootstrap init", to ask if the user
wants to build outdated packages during "pmbootstrap install". Store the
result in the new pmbootstrap.cfg key "build_pkgs_on_install". I've put it at
the end, because it is a rather complicated question compared to the rest.
This is useful to speed up the installation for casual users who can now
avoid compiling packages. But also for the official images where we only
want to ship the official binary packages and not build anything
on-the-fly.
Add initial support for the on-device installer in pmbootstrap. Let
pmbootstrap create a regular split image, then prepare a new installer
rootfs and copy the previously generated rootfs image into the installer
rootfs. Put the installer rootfs into a new image, with reserved space.
There is more to do from here, such as disabling the generation of the
user account when using --ondev. But this requires support in
postmarketos-ondev first, so let's build that iteratively.
Related: https://wiki.postmarketos.org/wiki/On-device_installer
Related: https://gitlab.com/postmarketOS/postmarketos-ondev/-/issues
Migrate to workdir version 5 and move already built packages into the edge
channel subdir, for example:
$WORK/packages/x86_64/hello-world-1-r5.apk
to:
$WORK/packages/edge/x86_64/hello-world-1-r5.apk
The build.postmarketos.org code has already been adjusted to find built
packages in either directory structure.
Do not go through the pmb.chroot.init() code path when running
pmb.install.losetup.umount() inside pmb.chroot.shutdown(). This is not
necessary, as pmb.install.losetup.umount() only gets called if the
chroot is already initialized and /dev/loop-control is mounted inside
the chroot.
Not going through this code path is important for the upcoming workdir
migration patch. Without this fix, it will fail with the following if
running "pmbootstrap install" before the work migration:
ERROR: Could not figure out on which release channel the 'native' chroot is
Whenever initializing new chroots, save the date in $WORK/workdir.cfg.
Add pmb.config.workdir.chroots_outdated() to check if it's time to zap
the chroots or not (since we don't update them automatically). Mark them
as outdated after two days.
This will be the first check in "pmbootstrap status" (future patches).
Related: #1829
While at it, also remove unnecessary "#!/usr/bin/env python3" in files
that only get imported, and adjust other empty/comment lines in the
beginnings of the files for consistency.
This makes files easier to read, and makes the pmbootstrap codebase more
consistent with the build.postmarketos.org codebase.
Remove in favor of similar, but more visible "--no-install" option for
"pmbootstrap flasher" and "pmbootstrap export".
It seems that the option wasn't really used by anybody, so let's just
remove it without a deprication period. If dear reader thinks otherwise
after this is merged, and is not happy with "--no-install", please state
your reasoning in a new issue, so we can discuss it.
Related: !1863
Rust packaging is new and still a bit weird in Alpine and postmarketOS.
As of writing, we only have one package (squeekboard), and use cargo to
download the source of all dependencies at build time (several git
repositories!) and compile it. Usually, this is a no-go, but at least
until this is resolved properly, let's cache the downloads as suggested
in: https://doc.rust-lang.org/cargo/guide/cargo-home.html
Related: #1861
When initializing the building chroots, some symlinks are created to
/mnt/pmbootstrap* dirs. With upcoming rust-related symlinks, they will
point to subdirs in /mnt/pmbootstrap-rust, such as
/mnt/pmbootstrap-rust/registry/cache. Create this directory structure if
it does not exist.
Because of an APKINDEX subpkg parsing bug, pmbootstrap currently assumes
that "ktp-common-internals" provides "make". It fails with a cryptic
error when trying to build a package without an existing postmarketOS
binary packages mirror (like done in the build.postmarketos.org
testsuite):
File "/home/user/code/pmbootstrap/pmb/chroot/apk.py", line 174, in replace_aports_packages_with_path
package + "-" + data_repo["version"] + ".apk")
TypeError: 'NoneType' object is not subscriptable
Replace this error with a more meaningful message, that points to the
issue analyzing this bug.
Related: https://gitlab.com/postmarketOS/build.postmarketos.org/issues/61
Fix configure crash when building mozjs60 by mounting tmpfs as /dev/shm
in chroots. This is an important fix, because of this dependency chain,
that is currently broken in armhf and armv7 (see pmaports#244):
postmarketos-base -> networkmanager -> polkit -> mozjs60
Launch native cross compilers inside foreign chroot. Enable by default,
but allow disabling with --no-crossdirect for now. This option and the
distcc-sshd related code will be removed in the future.
Obscure feature: it was possible to specify a local path as
--mirror-pmOS. It would then get mounted to /mnt/postmarketos-mirror
inside the chroot, and be specified as such in the generated
/etc/apk/repositories file.
I had used this once for some testing scripts, but I am sure nobody is
using this anymore. The same can be achieved with running a local http
server anyway:
<https://wiki.postmarketos.org/wiki/Installing_packages_on_a_running_phone>
Removing this makes it easier to support multiple postmarketOS mirrors
(next commit).
Move find_aport() and find_aport_guess_main() from pmb/build/other.py
to the new file pmb/helpers/pmaports.py.
Finding aports is not only needed when building packages, hence it
makes sense to move it out of pmb.build. The pmb/helpers/pmaports.py
file will have more pmaports related functions in a follow up commit.
Set HOME to /root for commands started with pmb.chroot.root() and to
/home/pmos for commands started with pmb.chroot.user().
POSIX requires this variable to be set, see:
<http://pubs.opengroup.org/onlinepubs/009695399/basedefs/xbd_chap08.html>
And this prevents a crash in "adb", which takes and alternative code
path if HOME is not set, that does not work with musl (fixes#1638).
Thanks to @ryang2678 for figuring this out!
Overview:
In order to execute foreign arch binaries on the host system, we are
using the Linux kernel's binfmt_misc feature in combination with
static builds of QEMU. Before this patch, the statically compiled
QEMU binaries were taken from Debian (mostly because I did not realize
that Alpine ships them as well). Now we can use the ones from the aport.
Benefits:
This allows us to easily update and patch the QEMU executables, we
don't need to be in sync with Debian's versions anymore.
Alpine's package is more modular, so we can save some download,
install, zap time, as well as disk space: setting up an armhf chroot
with pmbootstrap took ~102 MB before, now it's ~18 MB.
Detailed changes:
* Remove `cross/qemu-user-static-repack` aport
* Add `data/qemu-user-binfmt.txt` with the binfmt_misc flags for ELF
binaries of various arches (extracted from Debian's packaging)
* When parsing that file, don't write verbose messages to
`pmbootstrap log` anymore, only to the verbose log (can be enabled
with `pmbootstrap -v`)
* Rename `pmb.parse.arch.alpine_to_debian()` to ...`alpine_to_qemu()`
* Rename `arch_debian` to `arch_qemu`
Overview:
Since Alpine updated to distcc 3.3 last week, pmbootstrap wasn't able to use
distcc for cross compilation anymore. It always falled back to running the
compiler in QEMU (which works, but is a lot slower). The reason for that is,
that distcc requires all compilers that are being used in a whitelist now.
This partially fixes CVE-2004-2687 in distccd, which allowed trivial remote
code execution by any process connecting to the distccd server. We only run
distccd on localhost, but still this can be used for privilege escalation of
sandboxed processes running on the host system (not part of pmbootstrap
chroots).
Because the CVE is only partially fixed (see the comment in
`pmb/chroot/distccd.py` for details), we make sure that only the building
chroots can talk to the distcc server by running distcc over ssh.
Details:
* Completely refactored `pmb/chroot/distccd.py` to run distcc over ssh
* Store the running distcc server's arguments as JSON now, not as INI
* Make debugging distcc issues easy:
* Set DISTCC_BACKOFF_PERIOD=0, so the distcc client will not ignore the
server after errors happened (this masks the original error!)
* New pmbootstrap parameters:
* `--distcc-nofallback`: avoids falling back to compiling with QEMU and not
throwing an error
* `--ccache-disable`: avoid ccache (when the compiler output is cached,
distcc does not get used)
* `--verbose` prints verbose output of the distcc too
* New test case, that uses the new pmbootstrap parameters to force
compilation through distcc, and shows the output of distcc and distccd in
verbose mode on error (as well as the log of sshd)
The test suite needed a `pmbootstrap shutdown` after running through,
before it could successfully run again.
Explanation:
This was caused by `test/test_pkgrel_bump.py`, which creates a
temporary work folder with every subfolder ("chroot_native",
"cache_apk_x86_64", ...) linked to the original work folder except for
the "packages" folder. At the end of the test case,
`pmbootstrap shutdown` gets executed and is expected to umount
everything as usual. But it does not umount anything because of the
symlinks, so `work/chroot_native/mnt/pmbootstrap-packages` points to
the fake packages folder of that test case, even after it is finished.
As a result, any test case that tries to access the packages folder in
the native chroot, will fail until `pmbootstrap shutdown` gets called.
Detailed Changes:
* Umount all folders inside the work folder, even if these are symlinks
* Remove obsolete reference to "disable timestamp based rebuilds" in a
comment in `test/test_pkgrel_bump.py`
* Run `pmbootstrap work_migrate` and `pmbootstrap shutdown` at the
beginning of `test/testcases_fast.sh`, in case the pkgrel_bump test
case was aborted before it could properly shutdown and to make it
more robust in general (user may have changed the mountpoints, work
folder may need to be migrated)
* change "pmbootstrap kconfig_check" to "pmbootstrap kconfig check"
* change "pmbootstrap menuconfig" to "pmbootstrap kconfig edit [-x|-g]"
(with legacy alias, because the first syntax was referenced to a lot)
* enable X11 interfaces: -x: xconfig, -g: gconfig
* new function to copy the xauthority file:
pmb.chroot.other.copy_xauthority()
* remove menufconfig() function from the kernel template and all kernel
aports ([skip ci] because it would rebuild all kernels and run out of
time). Alpine has dropped this as well, and it wouldn't work with the
new code anyway.
Device nodes in the chroots get created in a tmpfs, so they can be
created even if the filesystem where the chroot resides does not
support device nodes (#1317). In "pmbootstrap shutdown" we umount the
`dev` folder, which means all device nodes that were created inside
this folder are gone. This commit changes the code to actually recreate
the device nodes when using the chroot again.
Details:
* move `pmb.chroot.init.create_device_nodes` to
`pmb.chroot.mount.crete_device_nodes`
* don't call it in `pmb.chroot.init()` anymore, but in
`pmb.chroot.mount_dev_tmpfs()`
* Create the `null` device as well (`apk --initdb` also creates it on
`init`, but we don't call it after `shutdown`)
* As discussed in IRC/matrix, we're removing `linux-postmarketos-lts`
for now. The kernel isn't used right now, and we save lots of
maintenance effort with not updating it every week or so.
* new config option `"kernel"` with possible values:
`"downstream", "mainline", "stable"` (downstream is always
`linux-$devicename`)
* ask for the kernel during `pmbootstrap init` if the device package
has kernel subpackages and install it in `_install.py`
* postmarketos-mkinitfs: display note instead of exit with error when
the `deviceinfo_dtb` file is missing (because we expect it to be
missing for downstream kernels)
* device-sony-amami:
* add kernel subpackages for downstream, mainline
* set `deviceinfo_dtb`
* device-qemu-amd64: add kernel subpackages for stable, lts, mainline
* test cases and test data for new functions
* test case that checks all aports for right usage of the feature:
* don't mix specifying kernels in depends *and* subpackages
* 1 kernel in depends is maximum
* kernel subpackages must have a valid name
* Test if devices packages reference at least one kernel
* Remove `_build_device_depends_note()` which informs the user that
`--ignore-depends` can be used with device packages to avoid building
the kernel. The idea was to make the transition easier after a change
we did months ago, and now the kernel doesn't always get built before
building the device package so it's not relevant anymore.
* pmb/chroot/other.py:
* Add autoinstall=True to kernel_flavors_installed(). When the flag
is set, the function makes sure that at least one kernel for the
device is installed.
* Remove kernel_flavor_autodetect() function, wherever it was used,
it has been replaced with kernel_flavors_installed()[0].
* pmb.helpers.frontend.py: remove code to install at least one kernel,
kernel_flavors_installed() takes care of that now.
In order to get cross-compilers, we generate a few aports (e.g.
binutils-armhf, gcc-armhf) automatically from Alpine's aports.
pmbootstrap was already able to perform a git checkout of Alpine's
aports repository. But it needed to be manually updated. Otherwise
the `pmbootstrap aportgen` command could actually downgrade the aport
instead of updating it to the current version.
After thinking about adding a dedicated pmbootstrap command for
updating git repositories, I thought it would be better to not open
that can of worms (pmbootstrap as general git wrapper? no thanks).
The solution implemented here compares the upstream aport version of
the git checkout of a certain package (e.g. gcc for gcc-armhf) with the
version in Alpine's binary package APKINDEX. When the aport version is
lower than the binary package version, it shows the user how to update
the git repository with just one command:
pmbootstrap chroot --add=git --user -- \
git -C /mnt/pmbootstrap-git/aports_upstream pull
Changes:
* `pmb.aportgen.core.get_upstream_aport()`: new function, that returns
the absolute path to the upstream aport on disk, after checking the
version of the aport against the binary package.
* Use that new function in pmb.aportgen.gcc and pmb.aportgen.binutils
* New function `pmb.helpers.repo.alpine_apkindex_path()`: updates the
APKINDEX if necessary and returns the absolute path to the APKINDEX.
This code was basically present already, but not as function, so now
we have a bit less overhead there.
* `pmbootstrap chroot`: new `--user` argument
* `pmb.parse.apkbuild`: make pkgname check optional, as it fails with
the official gcc APKBUILD before we modify it (the current APKBUILD
parser is not meant to be perfect, as this would require a full shell
parsing implementation).
* Extended `test_aportgen.py` and enabled it by default in
`testcases_fast.sh`. Previously it was disabled due to traffic
concerns (cloning the aports repo, but then again we do a full KDE
plasma mobile installation in Travis now, so that shouldn't matter
too much).
* `testcases_fast.sh`: With "test_aport_in_sync_with_git" removed
from the disabled-by-default list (left over from timestamp based
rebuilds), there were no more test cases disabled by default. I've
changed it, so now the qemu_running_processes test case is disabled,
and added an `--all` parameter to the script to disable no test
cases. Travis runs with the `--all` parameter while it's useful to
do a quick local test without `--all` in roughly 2 minutes instead of
10.
* `aports/cross/binutils-*`: Fix `_mirror` variable to point to current
default Alpine mirror (so the aportgen testcase runs through).
## Introduction
In #1302 we noticed that `pmb.chroot.user()` does not escape commands
properly: When passing one string with spaces, it would pass them as
two strings to the chroot. The use case is passing a description with
a space inside to `newapkbuild` with `pmboostrap newapkbuild`.
This is not a security issue, as we don't pass strings from untrusted
input to this function.
## Functions for running commands in pmbootstrap
To put the rest of the description in context: We have four high level
functions that run commands:
* `pmb.helpers.run.user()`
* `pmb.helpers.run.root()`
* `pmb.chroot.root()`
* `pmb.chroot.user()`
In addition, one low level function that the others invoke:
* `pmb.helpers.run.core()`
## Flawed test case
The issue described above did not get detected for so long, because we
have a test case in place since day one, which verifies that all of the
functions above escape everything properly:
* `test/test_shell_escape.py`
So the test case ran a given command through all these functions, and
compared the result each time. However, `pmb.chroot.root()`
modified the command variable (passed by reference) and did the
escaping already, which means `pmb.chroot.user()` running directly
afterwards only returns the right output when *not* doing any escaping.
Without questioning the accuracy of the test case, I've escaped
commands and environment variables with `shlex.quote()` *before*
passing them to `pmb.chroot.user()`. In retrospective this does not
make sense at all and is reverted with this commit.
## Environment variables
By coincidence, we have only passed custom environment variables to
`pmb.chroot.user()`, never to the other high level functions. This only
worked, because we did not do any escaping and the passed line gets
executed as shell command:
```
$ MYENV=test echo test2
test 2
```
If it was properly escaped as one shell command:
```
$ 'MYENV=test echo test2'
sh: MYENV=test echo test2: not found
```
So doing that clearly doesn't work anymore. I have added a new `env`
parameter to `pmb.chroot.user()` (and to all other high level functions
for consistency), where environment variables can be passed as a
dictionary. Then the function knows what to do and we end up with
properly escaped commands and environment variables.
## Details
* Add new `env` parameter to all high level command execution functions
* New `pmb.helpers.run.flat_cmd()` function, that takes a command as
list and environment variables as dict, and creates a properly escaped
flat string from the input.
* Use that function for proper escaping in all high level exec funcs
* Don't escape commands *before* passing them to `pmb.chroot.user()`
* Describe parameters of the command execution functions
* `pmbootstrap -v` writes the exact command to the log that was
executed (in addition to the simplified form we always write down for
readability)
* `test_shell_escape.py`: verify that the command passed by reference
has not been modified, add a new test for strings with spaces, add
tests for new function `pmb.helpers.run.flat_cmd()`
* Remove obsolete commend in `pmb.chroot.distccd` about environment
variables, because we don't use any there anymore
* Add `TERM=xterm` to default environment variables in the chroot,
so running ncurses applications like `menuconfig` and `nano` works out of
the box
`-m` is for deleting local compiled packages, for which there is no
aport with the same version. Prior to this change, this only worked
for packages where no aport exists, or for packages that are newer
than the aports.
That is, because we used the usual APKINDEX parsing logic, which
ignores old packages in the APKINDEX and only returns the one with the
highest version (that makes sense during dependency resolution).
Changes:
* New `pmb.parse.apkindex.parse_blocks()` function that returns a raw
list of blocks, instead of the dict with removed duplicates with
lower version you get from the usual `.parse()` function.
* Renamed each of the zap flags and their descriptions to make clear
what they are doing now.
```
short long (old) long (new)
-p --packages --pkgs-local
-m --mismatch-bins --pkgs-local-mismatch
-o, --old-bins --pkgs-online-mismatch
```
### Only download APKINDEX for relevant architectures
We're downloading the APKINDEX files for all architectures supported by
postmarketOS currently (x86, x86_64, armhf, aarch64). Most of the time,
we only need it for the native and device arch, so this PR reduces the
downloaded files to what is really necessary.
### Intuitive pmbootstrap update logic
* pmb.helpers.repo.update():
* Default is updating all arches where the APKBUILD files exist
* Add existing_only parameter
* Return True when files have been downloaded
* Properly print which arches will be updated
* Print update reason only in verbose log
* Add and improve comments
* pmb.parse.arguments(), update action:
* Add --non-existing parameter
* Default for --arch is None (instead of arch.native)
* pmb.helpers.frontend.update():
* Inform about --non-existing if no APKBUILDs have been updated
pmbootstrap does dependency resolving on its own, and passes the list
of resolved packages to apk when we want it to install something. The
reason was outlined in #129:
> fixing #120: packages do not get updated in "pmbootstrap install"
> after they have been rebuilt. For this to work, we specify all
> packages explicitly for abuild, instead of letting abuild do the
> resolving.
This new PR fixes#1212 (which noted that all of these dependencies
were explicitly marked for installation) by doing the following:
1. All packages and dependencies get attached to the virtual package
.pmbootstrap instead of world
2. We install the packages (without depends) explcitly
3. .pmbootstrap gets removed, which means that all packages from 1.
stay installed, but are no longer marked as explicitly installed.
They will get removed automatically, when the depending packages get
removed.
In addition, the mechanism for replacing the package of locally built
packages with their full path, was broken and has been fixed in this
commit. This is necessary to update packages of the same version with
apk.
Without this fix, `pmbootstrap zap -m` fails with:
File "/home/user/code/pmbootstrap/pmb/__init__.py", line 61, in main
getattr(frontend, args.action)(args)
File "/home/user/code/pmbootstrap/pmb/helpers/frontend.py", line 322, in zap
distfiles=args.distfiles)
File "/home/user/code/pmbootstrap/pmb/chroot/zap.py", line 54, in zap
zap_mismatch_bins(args, confirm, dry)
File "/home/user/code/pmbootstrap/pmb/chroot/zap.py", line 110, in zap_mismatch_bins
if pkgname != bin_data["pkgname"]:
KeyError: 'pkgname'
* The APKINDEX parser used to return a dictionary with one package for
a given package name. This works for the installed packages database,
because there can only be one provider for a package. But when
parsing packages from binary repositories, we need to support
multiple providers for one package. It is now possible to get a
dictionary with either multiple providers, or just a single provider
for each package.
* Dependency parsing logic has been adjusted, to support multiple
providers. For multiple providers, the one with the same package
name as the package we are looking up is prefered. If there is none
(eg. "so:libEGL.so.1" is provided by "mesa-egl"), it prefers packages
that will be installed anyway, and after that packages that are
already installed. When all else fails, it just picks the first one
and prints a note in the "pmbootstrap log".
* Added testcases for all functions in pmb.parse.apkindex and
pmb.parse.depends
* pmbootstrap chroot has a new "--add" parameter to specify packages
that pmbootstrap should build if neccessary, and install in the
chroot. This can be used to quickly test the depencency resolution
of pmbootstrap without doing a full "pmbootstrap install".
Fixes#1122.
Right now, they appear on screen when using --details-to-stdout. This
does not work well with Travis CI and screws up the log.
Disabling the progress bars in abuild works just like Alpine does it in
their Travis CI script: Exporting SUDO_APK as
"abuild-apk --no-progress" instead of "abuild-apk".
test_check_checksums.py: Run "pmbootstrap build_init" before building
any packages, so it is a bit less verbose (downloading the APKINDEX
files etc.). Later we run the build init code again (because we use
--strict while building the packages), but then the APKINDEX files
are already present. So overall the log is a bit shorter before the
building starts. (It is still logged to the logfile, which gets
printed on error anyway.)
zap -m:
* APKINDEX parsing: parse the "origin" field as well, so we know
where a subpackage comes from
* pmbootstrap zap -m: properly delete all packages, that do not
have an aport or where the aport has another version. This also
works with subpackages now,
we use the origin field to resolve it.
* Only reindex when packages have been deleted in "zap -m"
zap in general:
* Show the amount of cleared up space after the deletion instead
of "Done"
* Print "Shutdown complete" to "pmbootstrap log" instead of stdout
(we need to call it twice during zap now to get the space
calculation right)
* Add `--dry` argument to `pmbootstrap zap` (this was very useful
for debugging) to list the packages/chroots that would get
deleted
* Roughly output the command that would get executed to delete
files, so it's obvious what's going on in --dry mode. (% rm ...)
The message showed up, when you apk-static download could not be
verified. What the user needs to do instead is checking if openssl
is installed, and possibly delete the http cache ("zap -hc").
This PR makes the workflow faster and pmbootstrap will
produce less traffic. Details:
* Check if it's possible to create and read from a device
node directly when initializing a chroot (closes#472)
* Copy the Qemu binary into the forign-arch chroots
before initializing them, so the post-install script
directly work during the chroot setup and we don't need
to call apk fix afterwards
* Use pmb.helpers.repo.update(), which only updates the
APKINDEX files if they are older than 4 hours, instead
of using apk's repo update function which always
downloads the APKINDEX files
* Chroot initialization
* Getting the initial APKINDEX to download apk-tools-static
* Updating the APKINDEX at the start of pmbootstrap install
* Fixed a bug in from_chroot_suffix: the buildroot_x86_64 has
architecture x86_64, not x86.
* ccache: Fix for distcc cross-compiling / various improvements
* Make ccache work when cross-compiling with distcc (fix#716)
* Allow to configure the ccache size in "pmbootstrap init"
* Moved ccache stats code from pmb/build/other.py to
pmb/helpers/frontend.py
* Grouped job count, ccache size and timestamp based rebuilds
together to "build options" and allow to skip them
* Sorted config options that had to be modified anyway
alphabetically
* Improve comment in arch-bin-masquerade APKBUILD
* Rename pmb/build/package.py to pmb/build/_package.py, so we can
access the functions it contains in testcases, and still use
pmb.build.package()
* Refactor the entire file. Instead of one big function that does
too many things, we have many small ones now, that are tested
in the testsuite and easier to modify
* Whenever building a package, pmbootstrap does not only build and
install the "makedepends" (like we did before), now it does the
same for the "depends". That's required to be compatible with
abuild. The old behavior can still be used with 'pmbootstrap
build --ignore-depends'.
* Because of that change, noarch packages can no longer be built in
the native chroot if we need them for a foreign chroot. A device-
package depending on a kernel would pull in the same kernel for
the native architecture otherwise.
* Running 'pmbootstrap build device-...' without '--ignore-depends'
and without a matching '--arch' displays a note that explains
this change to the user and tells how to use it instead.
* Noarch packages no longer get symlinked. That was only
implemented for packages built in the native chroot, and now that
is not always the case anymore. Symlinking these packages creates
packages with broken dependencies anyway (e.g.
device-samsung-i9100 can't be installed in x86_64, because
linux-samsung-i9100 is armhf only).
* Rename "carch" to "arch" wherever used. Naming it "carch"
sometimes is confusing with no benefit.
* Add a testcase for the aarch64 qemu workaround (because it failed
first and I needed to know for sure if it is working again).
* Improved some verbose logging, which helped with development of
this feature.
* Removed the old "build" test case (which was disabled in
testcases_fast.sh) as the new "build_package" test case covers its
functionallity.
* Only build indexes if the packages folder exists for that arch (Travis
couldn't run a test case otherwise)
This removes any existing symlinks (which always seem to be broken when
this is encountered) to <workdir>/chroot_native/etc/apk/cache before
creating the symlink.
* Allow to specify a custom username in "pmbootstrap init"
* Build chroots have "pmos" instead of "user" as username now
* Installation user UID is 1000 now (as in all other Linux distributions)
* Adjust autologins
* postmarketos-base: enable wheel group for sudo, removed previous sudoers file
* Implement safe upgrade path:
We save the version of the work folder format now, in $WORK/version.
When this file does not exist, it defaults to 0.
In case it does not match the currently required version
(pmb.config.work_version), then ask the user if it should
automatically be upgraded.
This adds a new option to `zap`: `-m / --mismatch-bins`
When set, any binary apks in the work directory packages folder will be
removed if their version differs from the version in the relevant
APKBUILD in aports.
* The system image size is now calculated as: root size - home size.
* New function in `pmb/helpers/other.py`: `folder_size()`, with a
testcase.
* Instead of copying everything to the system image folder, and
deleting the home folder afterwards, do not copy the home folder
in the first place.
* Added `pmbootstrap -s` to skip generating the initramfs for faster
debugging.
* Set the default value in the "are you sure, that your partition has
at least..." to "y", so we can run `yes '' | pmbootstrap install`
to make it run through the whole installation process.
* Increase full size to 120%, boot partition gets 15 MB free space now
This extends zap() to add a 'no_confirm' option (False by default), and
zap() is now called by init with no_confirm=True to automatically zap
any existing chroots after the user runs init. This helps insure that
what is installed in the chroots is exactly what the user expects after
setting options in init.
Additionally, we create `cache_http` to verify write access to the work
folder instead of `chroot_native`. So we can ask for zapping only if
no chroot folder exists.
I've replaced all instances in the code of `os.path.abspath`
with `os.path.realpath`, as this does the same as `abspath`
plus resolving symlinks.
See also: https://stackoverflow.com/a/40311142
Previously, distutils.version.LooseVersion was used, because it was
sort of close enough to how Alpine parses versions.
This new version uses the exact same algorithm, as `apk` does, and
it passes *all* of `apk`'s testcases for version checking (previously
we simply skipped the ones, that did not pass).
* Remove pmb/helpers/version.py left-over (it is in parse now)
* Make asserts consistent, do not use unnecessary parenthesis
Changes:
* Removed the apkindex_files cache. That particular cache caused
bug #189 and didn't bring any real-world performance improvements
(tested 3x with that cache and 3x without, no significant speed
difference). I decided to remove it instead of keeping it/adding
even more code to resolve the bug.
* Fix the check for already built packages: always use the architecture,
that the package should be built for instead of the architecture of
the build environment (e.g. use armhf, even when building a noarch
package in the x86_64 chroot). This partially resolves#341.
* Make pmb.chroot.apk.install_is_necessary() more robust: If the binary
package is missing, although it should be there, print a warning and
build it with force.
Huge thank you to @drebrez for his amazing work on this PR!
* Add generation of initramfs-extra with additional binaries
Extract both initramfs with `pmbootstrap initfs extract`
Add new splashscreens for missing partitions/files errors
Changes in init script:
- use busybox findfs applet to find boot partition
- mount boot partion
- extract initramfs-extra
- show error splashscreens accordingly and loop forever
- start usb unlock directly from unlock_root_partition (hook removed)
* Print out a text message for serial debugging in case of errors
Add initramfs-extra files to `pmbootstrap initfs ls` output
* Fix trailing whitespace in comment...
* ls: Indicate which initramfs we're looking at / add wiki link
I've rewritten the initramfs-development article to reflect the
changes made in this PR. It will be a good read for someone who
extracted the initramfs and wants to know why we have two files.
* Refactored `umount_all` to get the list of folders to be umounted from
`umount_all_list`, so we can test that function in a test case.
* Adjusted `umount_all_list` to return the deep folder levels first
* Added a testcase for that
* Remove redundant calls to `umount_all()` (which were from a time before
`pmbootstrap` was released, in which failing commands did not cause
`pmbootstrap` to raise an exception)
* Validate all inputs from `pmbootstrap init`
* Add a new `confirm()` function, that validates input of yes/no
questions properly
* All questions loop until they have a valid answer now
The creates the linux-postmarketos package which for now supports the n900 (and probably the other maemo devices) and qemu with the vexpress-a9 machine simulation.
I've put the generated dtbs in /usr/share/dtb for now and set the dtb field in the deviceinfo for the n900 and my new qemu device.
* Introduced linux-postmarketos-omap
* Unified kernel progress
* Created kernel bootable with qemu
* Updated n900 deviceinfo for generic kernel
* Changed qemu device to vexpress
* Updated APK comments and added linux-postmarketos-dev package
* Append dtb in mkinitfs
* Fixed bootscript on n900 for the generic kernel
* Don't detect double flavors with -dtb appending
* Added graphics drivers for vexpress (qemu)
* Added more drivers for qemu
This adds virtio network support in qemu for the vexpress-a9 machine.
The keyboard and mouse don't work yet.
You can boot into weston if --no-fde is specified
I've had a strange case where `cryptsetup status` did not work
inside the chroot anymore, and only zapping it would resolve it.
But I couldn't zap, because the status check was preventing shutdown
(on which zap depends) from working. This commit works around that.
I've done some refactoring while debugging #209.
* Unused file `pmb/build/crosscompiler.py` removed (that was a
left over from `_pmb_build_in_native_chroot` hack
* Do verbose logging in distccd, when `pmbootstrap --verbose` is
being invoked
* Restart distccd, when the commandline has changed (e.g. when the
currently running version was not verbose, and the new one is
verbose.) Prior to this change, it only got restarted, when the
architecture changed (so it did not allow changing the job count
on the fly for example).
* Insert missing whitespace in arguments help.
This is required for developing and testing the binary repository
scripts (see #64). Changes:
* When specified, the local folder gets mounted inside the chroots
as /mnt/postmarketos-mirror
* The apkindex_files() function outputs the correct path to the local
repository (it does *not* hash the URL in that case, which would
be wrong)
* /etc/apk/repositories: when the pmOS mirror is a local folder,
the path "/mnt/postmarketos-mirror" gets added to that file instead
of the outside path (so apk finds it properly inside the chroot)
This is important for the binary repository scripts, so it's feasible
to test the binary package build and challenge process locally without
setting up a new chroot whenever changing the repo URLs.
Also it behaves a bit more intuitively, because it really uses the
repo URL specified on the commandline, even when the chroot is already
set up.
TLDR: Always rebuild/install packages when something changed when executing "pmbootstrap install/initfs/flash", more speed in dependency resolution.
---
pmbootstrap has already gotten some support for "timestamp based rebuilds", which modifies the logic for when packages should be rebuilt. It doesn't only consider packages outdated with old pkgver/pkgrel combinations, but also packages, where a source file has a newer timestamp, than the built package has.
I've found out, that this can lead to more rebuilds than expected. For example, when you check out the pmbootstrap git repository again into another folder, although you have already built packages. Then all files have the timestamp of the checkout, and the packages will appear to be outdated. While this is not largely a concern now, this will become a problem once we have a binary package repository, because then the packages from the binary repo will always seem to be outdated, if you just freshly checked out the repository.
To combat this, git gets asked if the files from the aport we're looking at are in sync with upstream, or not. Only when the files are not in sync with upstream and the timestamps of the sources are newer, a rebuild gets triggered from now on.
In case this logic should fail, I've added an option during "pmbootstrap init" where you can enable or disable the "timestamp based rebuilds" option.
In addition to that, this commit also works on fixing #120: packages do not get updated in "pmbootstrap install" after they have been rebuilt. For this to work, we specify all packages explicitly for abuild, instead of letting abuild do the resolving. This feature will also work with the "timestamp based rebuilds".
This commit also fixes the working_dir argument in pmb.helpers.run.user, which was simply ignored before.
Finally, the performance of the dependency resolution is faster again (when compared to the current version in master), because the parsed apkbuilds and finding the aport by pkgname gets cached during one pmbootstrap call (in args.cache, which also makes it easy to put fake data there in testcases).
The new dependency resolution code can output lots of verbose messages for debugging by specifying the `-v` parameter. The meaning of that changed, it used to output the file names where log messages come from, but no one seemed to use that anyway.
...instead of running apk every time to get the list of installed
packages and their versions. The internal package database from
apk has the same format, as the extracted APKINDEX file (except
that it has more key-value pairs, which we ignore/do not need
right now). So the APKINDEX code has been extended to parse both
tar-packed APKINDEX files and regular text files in the APKINDEX
format.
This is required for #108, for a better detection of outdated
packages (because the internal package database saves the
package's timestamp, too). A nice benefit is, that this is faster
than calling apk every time and it doesn't fill up the log as much.
I've also used this improved function for determining the apk
version (for the outdated version check), and I've deleted
pmb.parse.other.package_split(), as it is not needed anymore.
* Minimum version: 2.7.2 (which fixes two CVEs)
* Check the minimum apk version before doing something with apk and
before entering the chroot manually (previously, it has just checked
the apk-tools-static version, which gets used to set up the chroot)
* Reword the message for an outdated APK version. Most likely it is
just the outdated http cache, instead of a man-in-the-middle attack.
See also:
b849b481a0
* New commandline parameter --mirror-pmOS, where the binary repository
URL for postmarketOS can be specified (empty by default as of now,
this will be filled with the real URL once the repo works)
* Do not build packages, when they are in the binary repository and
the version of the package in the binary repository is up-to-date.
* Add a testcase for pmb.build.is_necessary().
* pmb/challenge/apk.py had to be renamed to pmb/challenge/apk_file.py,
so the "internal" functions of that file could be accessed, while
still providing the short notation pmb.challenge.apk().
* zap asks for each buildroot_* chroot, if you want to remove it, not
only for the one with the device arch
* add new pmb.chroot.tempfolder() function, that creates a temporary
folder, that belongs to "user" and deletes it, if it already exists.
this function gets used in a few challenge testcases.
* Fix hardcoded `armhf` in pmb/aportgen/binutils.py
* Generate aports: `binutils-aarch64`, `musl-aarch64`, `gcc-aarch64`
* Distccd: Remember the cross-compiler architecture (currently armhf
or aarch64), that the current distccd is running as, and restart
distccd with the correct architecture, in case a different arch
is needed than what it is currently running as. (Depending on the
cross-compiler arch, the PATH variable gets adjusted before
starting distccd)
* Testcases: add aport generation for aarch64, add cross-compiling
to aarch64
* pmb/parse/arch.py: Add aarch64 to the mapping
Maxim Karasev
Caleb Connolly
Anri Dellal
Oliver Smith
Johannes Marbach
Luca Weiss
Daniele Debernardi
Anjandev Momi
Minecrell
Oliver Smith
Zhuowei Zhang
steamport
Alexander
shwsh
clayton craft
Pablo Castellano
Attila Szöllősi
indefini
Martijn Braam